MS610A/MS610C/MS610J二手频谱仪

名称:MS610A/MS610C/MS610J二手频谱仪

供应商:北京市北方思源电子技术中心

价格:面议

最小起订量:1/台

地址:北京市海淀区大柳树路富海中心

手机:13241735460

联系人:北方思源 (请说在中科商务网上看到)

产品编号:39562053

更新时间:2021-02-21

发布者IP:123.120.33.234

详细说明

  Anritsu MS610A MS610C MS610J 频谱仪

  厂家: 日本安立(高 177mm 长 351mm; 13.5 kg)

  MS610J : 10kHz - 2GHz , 75ohm

  MS610A : 10kHz - 2GHz , 50ohm

  MS610C : 9kHz - 2GHz , 50ohm

The Anritsu MS610J spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Anritsu MS610J. The CRT displays received signal strength (y-axis) against frequency ( x-axis). Some applications for Anritsu MS610J Spectrum Analyzers include Site Monitoring: Verify that the frequency and signal strength of your transmitter is accurate. Interference: Before a system is installed you use a Anritsu MS610J spectrum analyzer to verify that the frequencies (you plan to use) are not occupied or if the presence of a very strong signal will interfere with your new setup. Interference can be created by a number of different situations. Other tests that utilize the Anritsu MS610J spectrum analyzer features include antenna isolation, co-channel interference, adjacent channel power, occupied bandwidth, intermodulation, microwave or satellite antenna alignment, and characterization of components.
Input Impedance 75 Ohm
Minimum Frequency 10 kHz
Maximum Frequency 2 GHz
Zero Span Yes
Minimum Span 0.1 MHz
Maximum Span 1 GHz
Minimum Sweep Time 10 ms
Maximum Sweep Time 10 s
Minimum Resolution Bandwidth 1 kHz
Maximum Resolution Bandwidth 1 MHz
Resolution Bandwidth Steps 1/3/10
Minimum Video Bandwidth 100 Hz
Maximum Video Bandwidth 10 kHz
Video Bandwidth Steps 1/10/100
Maximum Single-Side-Band Noise -70 dBc/Hz
Maximum Safe AC Input 20 dBm
Maximum DC Input 50 V
Maximum Displayed Average Noise -107 dBm
Maximum Amplitude Uncertainty 1.5 %
Trigger Modes Freerun,TTL