FIRE-RETARDANT COMMUNICATION CABLES FOR COAL MINES | 产品用途:产品用于煤矿井下电话通信干线、配线和用户线路。 Scope of application:The product uses in the coal mine mine shaft telephone communication skeleton line, matches the line and the subscriber's loop 执行标准 Standards implemented:MT 81814-1999 | | 型号、名称及使用范围 Model、Descriptions and Use scope | 型号 Model | 名 称 Descriptions | 使 用 范 围 Use scope | | MHYV | 煤矿用聚乙烯绝缘聚氯乙烯护套通信电缆 PE insulated PVC sheathed communication cables for coal mines | 用于平巷、斜巷及机电硐室 Served in level,slanted channels and power house | | MHJYV | 煤矿用加强型线芯聚乙烯绝缘聚氯乙烯护套通信电缆 Reinforced core PE insulated PVC sheathed communication cables for coal mines | 用于机械损伤较高的平巷和斜巷 Served in level and slanted channels where mechanical damage is frequent | | MHYBV | 煤矿用聚乙烯绝缘镀锌钢丝编织铠装聚氯乙烯护套通信电缆 PE insulated galvanized steel wire weave armored PVC sheathed communication cables for coal mines | 用于机械冲击较高的平巷和斜巷 Served in level and slanted channels where mechanical damage is frequent | | MHYAV | 煤矿用聚乙烯绝缘铝-聚乙烯粘护层聚氯乙烯护套通信电缆 PE insulated Al/PE binding layer PVC sheathed communication cables for coal mines | 用于较潮湿的斜井和平巷 Served in level and slanted channels with high humidity | | MHYA32 | 煤矿用聚乙烯绝缘铝-聚乙烯粘结护层钢丝铠装聚氯乙烯护套通信电缆 PE insulated Al/PE binding layer steel wire armored PVC sheathed communication cables for coal mines | 用于竖井或斜井 Served in shaft and slanted shaft | 使用特性 Service characteristics | 电缆长期允许工作温度 Long-term service temperature of the cable conductor | -40℃-+50℃ | | 电缆敷设温度 Cable laying temperature | ≥-10℃ | | +25℃时环境相对湿度 Environment relative humidity at 25℃ | ≤95% | | 电缆的最小弯曲半径 Minimun bending radius | MHYV及MHJYV型电缆为电缆外径的10倍，其它型号为外径的15倍 10 times of the cable outer diameter of MHJYV, and 15times for the rest | 电缆规格 Specifications | 型 号 Model | 规 格 Specifications | 导体结构(根/直径)mm Conductor structure(number/diameter) | | MHYV | 1x2、2x2、1x4、5x2 | 7/0.28 | | MHJYV | 1x2、2x2 | 4/0.28铜线+3/0.28钢线 4/0.28 copper wire +3/0.28 steel wire | | MHYBV | 5x2、10x2、20x2 | 1/0.8 | | MHYAV | 20x2、30x2、50x2 | | MHYA32 | 30x2、50x2、80x2 | 电缆主要技术性能 Major technical performances 1、电缆导体直流电阻及固有衰减 DC resistance of the conductor and Intrinsic attenuation | 型 号 Model | 20℃时导体直流电阻 DC resistance of conductor at 20℃ ≤Ω ( ， /km) | 固有衰减(800Hz) Intrinsic attenuation ≤( ,dB/km) | | MHYV | 45 | 1.10 | | MHJYV | 73 | 1.30 | | MHYBV MHYAV MHYA32 | 36.7 | 0.95 | 2、电缆其它主要技术性能 Other major technical performances ( MHYV、MHJYV、MHYBV MHYAV、MHYA32) | 序 号 Serial number | 项目 Items | 技术性能 Technical performances | | 1 | +20℃线芯直流电阻(≤Ω/Km) Line core DC resistance at 20℃ | 见上表 See above table | | 2 | 电缆固有衰减(≤dB/Km) Cable intrinsic attenuation | 见上表 See above table | | 3 | +20℃绝缘电阻(≥MΩ Km) Insulating resistance at 20℃ | 3000 | | 4 | lmin工频交流电压试验 lmin power frequency alternating current pressure test | 1500V不击穿(50Hz) 1500V Does not penetrate | | 5 | 远端串音衰减(≥dB/500) Far-end crosstalk attenuation | 70(800Hz) | | 6 | 电感(≤μH/Km) Inductance | 800(800Hz) | | 7 | 电缆工作电容(≤μF/Km) Cable service capacity | 0.06(800Hz) | | 8 | 工作对直流电阻差(≤%环阻) DC resistance difference | 2 | | 9 | 单根垂直燃烧试验 Combustion for single cable test | MT386 | | 10 | 成束燃烧试验 Combustion for bunched cable test | 符合GB/T18380标准中B类成束燃烧试验要求 Conforms to GB/T18380 standard B kind becomes ties the burning test |
|