Transformer isolated barrier non i.s.
107948 KFA6-SR-2.3L 2-channel, relay output 1 SPDT per channel, 3-wire input, minimum / maximum mode, 90 ... 253 V AC
Power supply
054270 KFA6-STR-1.24.4 1-channel, primary: 92 ... 265 V AC, secondary: 24 V DC / 4 A
046544 KFA6-STR-1.24.500 1-channel, primary: 92 ... 265 V AC, secondary: 24 V DC / 500 mA
Converters
188750 KFU8-USC-1.D 1-channel, universal signal converter current/voltage, relay, LC display, universal supply
Logic control units
188382 KFA6-DWB-1.D Rotation speed monitor, 12 kHz, 2 relay output, up to SIL2 (IEC 61508)
188380 KFA5-DWB-1.D Rotation speed monitor, 12 kHz, 2 relay output, up to SIL2 (IEC 61508)
188384 KFU8-DWB-1.D Rotation speed monitor, 12 kHz, 2 relay output, universal supply, up to SIL2 (IEC 61508)
188371 KFU8-UFC-1.D 1-channel, frequency converter with trip relay and analouge output, LC Display, universal supply, up to SIL2 (IEC 61508)
188376 KFU8-UFT-2.D 1/2-channel, Frequency to Current converter, direction of rotation, synchronous run, with LC display, up to SIL2 (IEC 61508)
115147 F-MPN-1 Converter for magnetic pickup to NAMUR (12kHz)
Transmitter supply non i.s.
108982 KFU8-CRG-1.D 1-channel, 3-wire; 0 ... 20 mA / 0 ... 20 mA, with 2 trip outputs, Display, up to SIL2 (IEC 61508)
Trip Amplifier non i.s.
113607 KFU8-GUT-1.D 1-channel, current, voltage, temperature- input, 2 SPDT output, analoque output, universal supply
K-System, Accessories
Overvoltage suppression, for intrinsically safe control circuits
Terminal modules for DIN rail
098908 K-LB-1.30 1-channel, up to 30 V, for galvanic isolated circuits
098912 K-LB-1.30G 1-channel, up to 30 V
098910 K-LB-1.6 1-channel, up to 6 V, for galvanic isolated circuits
098914 K-LB-1.6G 1-channel, up to 6 V
098909 K-LB-2.30 2-channel, up to 30 V, for two galvanic isolated circuits
098913 K-LB-2.30G 2-channel, up to 30 V
098911 K-LB-2.6 2-channel, up to 6 V, for two galvanic isolated circuits
098915 K-LB-2.6G 2-channel, up to 6 V
Installation in the cable gland of the field device
098916 FS-LB-I 20 mm ISO thread, 1-channel, up to 30 V, for galvanic isolated circuits
098917 FP-LB-I PG 13,5 thread, 1-channel, up to 30 V, for galvanic isolated circuits
098918 FN-LB-I 1/2" NPT thread, 1-channel, up to 30 V, for galvanic isolated circuits
To plug on the standard K-modules
103637 P-LB-1.A.13 protection for terminal 1+3
103639 P-LB-1.B.12 protection for terminal 1+2
103641 P-LB-1.C.123 protection for terminal 1+2+3
103642 P-LB-1.D.1234 protection for terminal 1+2+3+4
103645 P-LB-1.E.23 protection for terminal 2+3
103646 P-LB-1.F.1236 protection for terminal 1+2+3+6
103638 P-LB-2.A.1346 protection for terminal 1+3+4+6
103640 P-LB-2.B.1245 protection for terminal 1+2+4+5
103643 P-LB-2.C.2356 protection for terminal 2+3+5+6
103647 P-LB-2.D.123456 protection for terminal 1+2+3+4+5+6
Accessories
Power Rail
119265 UPR-03 3-conductor, length: 2 m incl. DIN rail and caps, replaced UPR-02
038005 UPR-05 5-conductor, length: 2 m incl. DIN rail and caps
Power Rail power supply module
189783 KFD2-EB2 24 V DC / 4 A
189784 KFD2-EB2.R4A.B 24 V DC / 2 A, for redundant power supplies, with bus terminal
112694 F-KD-Ex2 Terminal modules with diodes for 2:1 mode of NAMUR sensors, set of 5 pieces
112693 F-KDR-Ex2 Terminal modules with diodes and 10k/1k resistor for 2:1 mode of an mechanical contact, set of 5 pieces
For temperature measuring devices KFD2-UT-..., KFD2-GU-..., KFD2-UFC-...
071901 K-CJC-BU terminal with integrated temperature sensor for cold junction compensation for thermocouple, blue, for IS
072054 K-CJC-GN terminal with integrated temperature sensor for cold junction compensation for thermocouple, black, for non IS
181953 K-ADP1 PC adapter, 3,5 X 18,3 mm plug + 3,5 X 14 mm plug
188916 K-ADP-USB PC adapter: USB <--> 3,5 X 18,3 mm plug + 3,5 X 14 mm plug
PACTware - Programming software
195870 DTM-Collection-CD CD-ROM with complete DTM-Collection of all available DTMs of the Pepperl+Fuchs HID, K- and E-series devices, HART Multiplexers, Remote I/O Systems, FieldConnex devices, Level devices and User Interface PACTware
Limited function without saving and printing
194208 DTM-I Single user licence for all available DTMs of Pepper+Fuchs HID, K- and series E-devices
Others
034343 KFD0-LGH Dummy housing with internal marshalling and wiring area
034868 KFD0-LGH-Y34868 Dummy housing for KF boards or motherboards to hold unused cables (reserve position)
034302 K-MS Mounting socket
103331 KF-FKC-3G2B device connector with cage clamp contact, set of 3 pieces green, 2 pieces blue)
103334 KF-FKC-5B device connector with cage clamp contact, set of 5 pieces blue
103330 KF-FKC-5G device connector with cage clamp contact, set of 5 pieces green
181645 K-500R0%1 measurement resistor 500 Ohm 0,1 %,
194093 K-22u damping capacitor for HART communication; 22uF / 16V
181952 KF-SEAL Adhesive sticker, only destructive removable, coupon sheet of 20 pieces
119114 IS01 Sensor-Simulator (NAMUR)
DIN Rail Devices (formerly Cooper CEAG)
For new projects we recommend the K-System
EEx i-Interface modules
Converters
Trip Amplifier
Analog Output
AH90242F11EEC010 AH 90242 output isolator, HART, EEx ia, 95-230V
AH90240F11EEC000 AH 90242 output isolator, EEx ia , 95-230V
AH90242F11EEA010 AH 90242 output isolator, HART, 95-230V
540078 AH90242F11EEA000 AH 90242 output isolator, 95-230V
Analog Input, Transmitter Supply
540089 AH90271F11EEC011 AH90271 Transmitter Supply, HART, EEx ia, Uo 27,5V, AC 95-230V
540093 AH90271F11EEG011 AH90271 Transmitter Supply, HART, EEx ia, Uo 25V, AC 95-230V
540088 AH90271F11EEC001 AH90271 Transmitter Supply, EEx ia, Uo 27,5V, AC 95-230V, output 0-20mA
540092 AH90271F11EEG001 AH90271 Transmitter Supply, EEx ia, Uo 25V, AC 95-230V, output 0-20mA
540087 AH90271F11EEA011 AH90271 Transmitter Supply, HART, AC 95-230V
540106 AH90365F11AA AH90365; Isolator, input and output 0-20mA, AC 95-230V
540111 AH90365F41AA AH90365; Isolator, input and output 0-20mA, DC 24V
Digital Output, Solenoid Valve Driver
Switch Amplifier with Transistor
Switch Amplifier with Relay
WE-system, series WE..., EEx i-Interface modules
AC 230 V power supply
<, TD style="BORDER-RIGHT: #ffffff; BORDER-TOP: #ffffff; BORDER-LEFT: #ffffff; BORDER-BOTTOM: #ffffff; BACKGROUND-COLOR: transparent"> Transformer isolated barrier [EEx i]
129197 WE 77/Ex-1 Use standard type: KFA6-SR2-Ex1.W
129198 WE 77/Ex-2 Use standard type: KFA6-SR2-Ex2.W
AC 115 V power supply
Transformer isolated barrier [EEx i]
129199 WE 77/Ex-1 110V Use standard type: KFA5-SR2-Ex1.W
129200 WE 77/Ex-2 110V Use standard type: KFA5-SR2-Ex2.W
Hi-Density Termination Board System
EEx i-Interface modules
Transformer isolated barrier [EEx i]
185536 HIC2821 1-channel, relay output
185537 HIC2822 2-channel, relay output
121448 HiD2822 2-channel, relay output
121451 HiD2824 4-channel, relay output
121454 HiD2842 2-channel, electronic output, up to SIL2 (IEC 61508)
121457 HiD2844 4-channel, electronic output
Solenoid driverse
185538 HIC2871 1-channel, bus or loop powered, up to SIL3
121464 HiD2871 1-channel, bus or loop powered
121471 HiD2872 2-channel, bus or loop powered, up to SIL2 (IEC 61508)
121502 HiD2873 1-channel, bus powered
121505 HiD2874 2-channel, bus powered
121486 HiD2875 1-channel, bus or loop powered, Io = 93 mA
121489 HiD2876 2-channel, bus or loop powered, Io = 93 mA, up to SIL2 (IEC 61508)
121512 HiD2877 1-channel, bus powered, Io = 93 mA
121515 HiD2878 2-channel, bus powered, Io = 93 mA
121518 HiD2881 1-channel, bus or loop powered, II B output, up to SIL2 (IEC 61508)
Transmitter power supply [EEx i]
185539 HIC2025 1-channel, 2-Wire: 4 ... 20 mA, SMART
121426 HiD2025 1-channel, 2-Wire: 4 ... 20 mA, SMART
121432 HiD2025SK 1-channel, 2-Wire: 4 ... 20 mA, SMART, Sink mode output
121429 HiD2026 2-channel, 2-Wire: 4 ... 20 mA, SMART, up to SIL2 (IEC 61508)
121434 HiD2026SK 2-channel, 2-Wire: 4 ... 20 mA, SMART, Sink mode output, up to SIL2 (IEC 61508)
121492 HiD2029 1-channel, 2/3-Wire: 4 ... 20 mA, SMART
121498 HiD2029SK 1-channel, 2/3-Wire: 4 ... 20 mA, SMART, Sink mode output
121495 HiD2030 2-channel, 2/3-Wire: 4 ... 20 mA, SMART, up to SIL2 (IEC 61508)
121500 HiD2030SK 2-channel, 2/3-Wire: 4 ... 20 mA, SMART, Sink mode output, up to SIL2 (IEC 61508)
Isolated Repeater [EEx i]
186229 HIC2031 1-channel, 4...20 mA, SMART
128759 HiD2012 2-channel, Voltage/Current, SMART
121478 HiD2031 1-channel, 4 ... 20 mA
121480 HiD2032 2-channel, 4 ... 20 mA
Isolated Repeater without Auxiliary Power [EEx i]
121474 HiD2033 1-channel, 4 ... 20 mA
121476 HiD2034 2-channel, 4 ... 20 mA
Isolated Repeater for fire and smoke detectors [EEx i]