| φ系列车床规格参数表ф630series lathe specifications and data |
| 参数Data 型号Model | CW6163D | CW6263D | 参数Data 型号Model | CW6163D | CW6263D | CW6263D |
| 工作范围Capacity | 尾座套筒减速机构Speed reduction rate of sleeve | 1:1/1:5 |
| 床身是最大回转直径Max.swing over bed | φ670 | φ670 | 进给和螺纹Feed and Threads |
| 滑板上最回转直径Max.swing over slide | φ390 | φ390 | 纵向进给量Longitudinal feed | 64种kinds0.1-24 |
| 马鞍内最大回转直径Max.swing in gap | | φ930 | 横向进给量Transverse feed | 64种kinds0.05-12 |
| 马鞍槽内有效长度Effective length ia gap | | 340 | 车床主丝杠螺距Pitch of leadscrew | 12 |
| 床面宽度Width of bed | 550 | 公制螺纹Metrical threads | 50种kinds1-240mm |
| 主轴箱Headstock | | 英寸制螺纹Inch-system threads | 43种kinds19-1/16T.P.I |
| 主轴孔内径Taper of spindle bore | φ105 | 模数螺纹Modular threads | 53种kinds0.5-120m |
| 主轴孔锥度Spindle nose type | 120 | 径节螺纹Diametrical pitch threads | 42种kinds30-1/8D.P |
| 主轴头型式Spindle nose type | C型法兰连接Ctype flange comected | 小刀架最大行程Max.travel of top slide | 240 |
| 主轴转速范围Range of spindle speed | 18级streps(8-1100r/min) | 上滑板最大行程式Max.travel of cross slide | 500 |
| 主轴输出最大扭矩Max.Output torque at spindle | 3040N.m(11kwmotor) | 纵向快速移动速度longitudingal rapid traveling speed | 4m/min |
| 顶尖套筒莫氏锥度Morse taper of center sleeve | MT5(<4m) MT6(>4m) | 横向快速移动速度Tarnsverse rapid traveling speed | 2m/min |
| 尾座Tailstock | 电机Motor |
| 套筒直径Sleeve diameter | φ100 | 主电动机Main motor | 11kw |
| 尾座套筒孔莫氏锥度Morse faper of sleeve | MT5(<4m) MT6(>4m) | 快速移动电机Rapid-travel motor | 1.1kw |
| 尾座套筒最大行程Max.travel of tailstock sleeve | 300 | 冷却电机Cooling motor | 0.125kw |
| 机床规格和外形尺寸及重量Specification,outline dimension and net weight |
| 机床规格Specification | 750/1500/2000/3000/4000/5000/600/800/10000/12000 |
| 加工最大工件长度Max.length of tailstock sleeve | 600/1350/1850/2850/3850/4850/5850/7850/9850/11850 |
| 机床外形尺寸（长X宽X高）Outline dimension | 2815/3515/4015/5015/6160/7160/8160/10160/10160/12160/14160X1395X1565 |
| 机床净重（约计）公斤Net weight(approx.)Kg | 3600/4300/5000/5800/6500/7200/8000/11000/13000/15000 |
| 1.随机附件:莫氏5号、6号顶尖、顶尖套、φ320mm三爪卡盘，φ25-200中心架，φ20-φ100跟刀架，随机工具（具体见装箱单）； 2、特殊附件；莫氏5号、6号活顶尖，φ400mm、φ500mm三爪卡盘，φ500mm、φ630mm四爪卡盘，拨盘，φ800、φ950花盘，φ200-φ400特大中心架，φ100-φ200跟刀架，砂轮磨头，砂带磨制装置，小刀架自动走刀装置； 1、Standard accessories:Morse No.5or No.6center,center sleeve,φ320mm3-jaw chuck,φ25-φ200steady rest,φ20-φ100follow rest and a set of standard tools 2、Optional accessories:Morse No.5or No.6center,φ400mm orφ500mm3-jaw chuck,φ500mm or φ630mm4-jaw chuck,drive plate,φ800 or φ950mm face plate,φ200-φ400super large steady rest,φ100-φ200 follow rest,wheel grinding attachment ,belt grinding |