详细说明
| 一、用途及适用范围 INTRODUCTION AND APPLICATIONS T系列热继电器适用于交流50HZ或60HZ,电压至660V,电流至500A的电力线路中。一般用作三相感应电动机的过载与断相保护，常与B系列交流接触器配合组成电磁起动器。本产品是引进德国ABB公司制造技术的产品。 注:T16为手动复位，其他为手动和自动复位。具体见《产品使用说明书》 T series thermal overload relay is mainly suitable for A.C.electric power system with voltage up to 660V,current up to 500A,50-60HZ.It is generally used for the protection of overload and phase-tacking in circuits with three-phasse induce motors and is offen made up electromagnetic starters with B series A.C.contactors. Note:T16 is manually reset aucomatic to the other.AS shown on 《The operating introduction》 二、动作特性:三相负载平衡时的动作时间 MOTION CHARACTERISTIC:THREE-PHASE BALANCE MOTION TIME |
| 序号 No | 整定电流倍数 Set current cinles | 动作时间 Motion time | 起始条件 Start conidition | 环境温度 Temperature |
| 1 | 1.05 | >2h | 冷态 Cold state | 20±5℃ |
| 2 | 1.2 | >2h | 热态 Heat state (接序号1试验后) Following the No 1 test |
| 3 | 1.5 | <4min |
| 4 | 7.2 | 10A | 2S | ≤63A | 冷态 Cold state |
| 10A | 4S | >63A |
三、断相动作性能 PHASE-LOSING MOTION CHARACTERISTIC
| 序号 No | 整定电流倍数 Set current cinles | 动作时间 Motion time | 起始条件 Start conidition | 环境温度 Temperature |
| 任意二相 Arbitrary two phase | 第三相 Three phase |
| 1 | 1.0 | 0.9 | 冷态 Cold state | 20±5℃ |
| 2 | 1.15 | 0 | 热态 Heat state (接序号1试验后) Following the No 1 test |