| 东莞市天成机械有限公司系列鞋底专用机技术参数表 |
| 機械型號 Machine Type | Unit | TC-1000-T-1S | TC-1200-T-1S | TC-1500-T-1S |
| 射 出 系 統 | 螺桿直徑 Screw Diameter | mm | ∮40 | ∮45 | ∮40 | ∮50 | ∮45 | ∮55 |
| 射出壓力 Injection Pressure | kg/cm2 | 2011 | 2001 | 2011 | 1287 | 2001 | 1339 |
| 理論射出容量Theoretical Shot Volume | cm3 | 220 | 302 | 220 | 343 | 302 | 451 |
| 射出量 (PS) Max Shot Veight(PS) | g | 198 | 271 | 198 | 308 | 271 | 406 |
| oz | 7.7 | 9.5 | 7.7 | 10.8 | 9.5 | 14.3 |
| 射出率 Injection Rate | cm3/sec | 110 | 110 | 110 | 154 | 110 | 164 |
| 螺桿行程 Screw Stroke | mm | 175 | 175 | 190 |
| 螺桿轉速 Screw Speed Max | rpm | 0-160 | 0-160 | 0-186 |
| 射嘴接觸力Nozzle Contact Force | tons | 7.2 | 7.2 | 7.2 |
| 射嘴行程 Nozzle Retraction Stroke | mm | 250 | 250 | 250 |
| 溫度控制段數 Number of Temperature Control | – | 4+1 | 4+1 | 4+1 |
| 鎖 模 系 統 | 鎖模力 Clamping Force | tons | 100 | 120 | 150 |
| 開模力 Opeming Force | tons | 7 | 7.3 | 7.5 |
| 模板尺寸 Platen Size | mm | 650×650 | 690×690 | 790×790 |
| 柱內間距 Distance Between Tie Bare | mm | 360×360 | 400×400 | 470×470 |
| 最小模厚 Min Mold Height | mm | 230 | 250 | 250 |
| 開模行程 Opening Stroke | mm | 250 | 300 | 300 |
| 最大開模距離 Mar Open Daylight | mm | 480 | 550 | 550 |
| 頂出力量 Ejector Force | tons | 3.3 | 3.3 | 4.6 |
| 頂出行程 Ejector Stroke | mm | 50 | 50 | 50 |
| 射嘴中心高度 Radio Tsui center heinght | mm | 150±25 | 150±25 | 150±25 |
| 模中心至射嘴距 From the comer to state radio Tsui Min | mm | 130 | 130 | 130 |
| 滑模系統 | 滑模行程 Slide Stroke | mm | 650 | 680 | 750 |
| 滑模定位精度 Station Clearance | mm | ±0.02 | ±0.02 | ±0.02 |
| 油 壓 電 力 系 統 | 最大液壓壓力 Max Hydraulic Pressure | kg/cm2 | 140 | 140 | 140 |
| 泵浦吐出量 Pump Output | liters/min | 94 | 94 | 112 |
| 作動油量 Oil Reservoir Capacity | liters | 420 | 450 | 500 |
| 冷卻水用量 Cooling Water Consumption | liters/hr | 1400-1600 | 1400-1600 | 1800-2000 |
| 油壓馬達電力 Pump Motor Power | kw | 14.9 | 14.9 | 18.5 |
| 電熱容量 Barrel Heating Power | kw | 7.5 | 7.5 | 10.5 |
| 總用電量 Total Wattage | kw | 25.4 | 25.4 | 28.7 |
| 其 他 | 機器重量 Machine Weight | tons | 5.3 | 6.5 | 7.2 |
| 機器外型尺寸 Maching Dimensions | m | 4.3*1.8*3.3 | 4.5*1.8*3.5 | 4.8*1.9*3.6 |
| 付船重量 Shipping Weight | tons | — | — | — |
| 付船尺碼 Shipng Measurements | m | — | — | — |
| | | | | | | | |
| 特性 | | | | | | | |
| 1.立式锁模、卧式射出，适用于鞋底镶件成型． | | | | | | | |
| 2.氮化钢螺杆、料管、高扭矩液压马达驱动、多段注塑压，塑化性能好。 | | | | |
| 3.直压子母锁模设计，快速合模、低压安全锁模，异常自动锁模，多重压力控制，安全性能高，提高模具使用寿命。 |
| 4.电器保护装置，无误动作发生，维护操作人员安全。 | | | | | | |
| 5.自动故障显示,维修轻松快捷。 | | | | | | | |
| 6.电控、液压采用名牌零件，安静、精密、耐用。 | | | | | | | |
| 7.多段温度控制，多段射出压力，射速、背压无限调整，适合精密朔料零件成型。 | | | |
| 8.此机型为加装单模滑板，下模在外面做锁件工作，提高作业安全性和工作效率（成品顶出在尾部完成）。 |
| 可跟椐客户需求，重新设计机器，为客户提供最优质的服务 | | | |
| 1.Open vertical mode,horizontal injection for set pieces forming soles. | | | |
| 2.Nitride screw,feeding pipe,high torque hydraulic motor drive,multi-section injection press,good plastic performance |
| 3.Straight heavy duty lock mould cylinder,speedy clamp,low-pressure safety lock mould,abnormal auto open mould,multi-pressure control,high safety,improve the mould life. |
| 4.Electric protection device,no misrse,and guarantee the operators’safety | | | |
| 5.Auto error display,easy and fast maintenance | | | | | | | |
| 6.Electric control and hydraulic pressure use branded accessories which are quiet,precise and durable |
| 7.Multi-section temperature control,multi-section injection pressure,emitting speed,counter pressure neutral adjustment,applicable to precise molding of plastic accessories |
| 8.This model is embedded single-mould sliding plate which enables the lower mould make inlay parts outside,and to enhance the safety and working efficiency(finished goods are ejected in end part) |
| Can show with the customer demand, re-designed machine, to provide customers with the best quality service |