中科商务网

您的位置：供应信息分类 > 橡塑 > 工程塑料 > PA
135F美国杜邦PA66阻燃级

名称：135F美国杜邦PA66阻燃级

供应商：东莞市湘桓塑胶原料有限公司

价格：29.50元/千克

最小起订量：25/千克

地址：东莞市常平镇麦元村永昌街56号

手机：13790383513

联系人：莫林 （请说在中科商务网上看到）

产品编号：130370517

更新时间：2021-03-31

发布者IP：120.229.105.114

详细说明

　　DuPont Performance Polymers Zytel® 135F NC010 Nylon 66 (Unverified Data**)

　　Polymer,Thermoplastic,Nylon,Nylon 66

　　DuPont Performance Polymers

　　产品说明:

　　Unreinforced Nucleated Polyamide 66

　　Zytel 135F NC010 is a nucleated polyamide 66 resin for injection molding. It was developed for fast cycles and high productivity.

　　Information provided by DuPont Performance Polymers

　　DuPont Performance Polymers Zytel® 135F NC010 Nylon 66 (Unverified Data**) 物性表

机械性能额定值 (公制)额定值 (英制)测试方法
洛氏硬度（M 级）646450%RH; ISO 2039-2
 8787DAM; ISO 2039-2
洛氏硬度（R 级）11611650%RH; ISO 2039-2
 123123DAM; ISO 2039-2
抗张强度7.47 MPa@Strain 0.960 %, Temperature 90.0 °C1080 psi@Strain 0.960 %, Temperature 194 °FDAM; ISO 11403-1 -2
 11.4 MPa@Strain 0.480 %, Temperature 40.0 °C1650 psi@Strain 0.480 %, Temperature 104 °FDAM; ISO 11403-1 -2
 17.8 MPa@Strain 2.40 %, Temperature 90.0 °C2580 psi@Strain 2.40 %, Temperature 194 °FDAM; ISO 11403-1 -2
 18.0 MPa@Strain 0.480 %, Temperature 23.0 °C2610 psi@Strain 0.480 %, Temperature 73.4 °FDAM; ISO 11403-1 -2
 22.8 MPa@Strain 0.550 %, Temperature 0.000 °C3310 psi@Strain 0.550 %, Temperature 32.0 °FDAM; ISO 11403-1 -2
 24.5 MPa@Strain 3.84 %, Temperature 90.0 °C3550 psi@Strain 3.84 %, Temperature 194 °FDAM; ISO 11403-1 -2
 26.5 MPa@Strain 0.630 %, Temperature -20.0 °C3840 psi@Strain 0.630 %, Temperature -4.00 °FDAM; ISO 11403-1 -2
 41.6 MPa@Strain 1.92 %, Temperature 40.0 °C6030 psi@Strain 1.92 %, Temperature 104 °FDAM; ISO 11403-1 -2
 60.5 MPa@Strain 3.36 %, Temperature 40.0 °C8770 psi@Strain 3.36 %, Temperature 104 °FDAM; ISO 11403-1 -2
 65.5 MPa@Strain 1.92 %, Temperature 23.0 °C9500 psi@Strain 1.92 %, Temperature 73.4 °FDAM; ISO 11403-1 -2
 65.7 MPa@Strain 4.80 %, Temperature 40.0 °C9530 psi@Strain 4.80 %, Temperature 104 °FDAM; ISO 11403-1 -2
 82.7 MPa@Strain 2.20 %, Temperature 0.000 °C12000 psi@Strain 2.20 %, Temperature 32.0 °FDAM; ISO 11403-1 -2
 92.9 MPa@Strain 3.36 %, Temperature 23.0 °C13500 psi@Strain 3.36 %, Temperature 73.4 °FDAM; ISO 11403-1 -2
 95.4 MPa@Strain 2.52 %, Temperature -20.0 °C13800 psi@Strain 2.52 %, Temperature -4.00 °FDAM; ISO 11403-1 -2
 117 MPa@Strain 3.85 %, Temperature 0.000 °C17000 psi@Strain 3.85 %, Temperature 32.0 °FDAM; ISO 11403-1 -2
 133 MPa@Strain 4.41 %, Temperature -20.0 °C19300 psi@Strain 4.41 %, Temperature -4.00 °FDAM; ISO 11403-1 -2
 3.00 MPa@Strain 0.165 %, Time 36000 sec435 psi@Strain 0.165 %, Time 10.0 hour50%RH; isochronous; ISO 11403-1 -2
 3.00 MPa@Strain 0.192 %, Time 360000 sec435 psi@Strain 0.192 %, Time 100 hour50%RH; isochronous; ISO 11403-1 -2
 3.00 MPa@Strain 0.231 %, Time 3.60e+6 sec435 psi@Strain 0.231 %, Time 1000 hour50%RH; isochronous; ISO 11403-1 -2
 3.00 MPa@Strain 0.146 %, Time 3600 sec435 psi@Strain 0.146 %, Time 1.00 hour50%RH; isochronous; ISO 11403-1 -2
 3.00 MPa@Strain 0.297 %, Time 3.60e+7 sec435 psi@Strain 0.297 %, Time 10000 hour50%RH; isochronous; ISO 11403-1 -2
 12.0 MPa@Strain 1.45 %, Time 3.60e+7 sec1740 psi@Strain 1.45 %, Time 10000 hour50%RH; isochronous; ISO 11403-1 -2
 12.0 MPa@Strain 0.656 %, Time 3600 sec1740 psi@Strain 0.656 %, Time 1.00 hour50%RH; isochronous; ISO 11403-1 -2
 12.0 MPa@Strain 1.18 %, Time 3.60e+6 sec1740 psi@Strain 1.18 %, Time 1000 hour50%RH; isochronous; ISO 11403-1 -2
 12.0 MPa@Strain 0.947 %, Time 360000 sec1740 psi@Strain 0.947 %, Time 100 hour50%RH; isochronous; ISO 11403-1 -2
 12.0 MPa@Strain 0.772 %, Time 36000 sec1740 psi@Strain 0.772 %, Time 10.0 hour50%RH; isochronous; ISO 11403-1 -2
抗张强度(屈服)67.0 MPa9720 psi50%RH; ISO 527-1/-2
 96.0 MPa13900 psiDAM; ISO 527-1/-2
伸长率 (断裂)13 %13 %DAM; Nominal; ISO 527-1/-2
 50 %50 %50%RH; Nominal; ISO 527-1/-2
屈服伸长率4.5 %4.5 %DAM; ISO 527-1/-2
 4.5 %4.5 %DAM; ISO 527-3
 18 %18 %50%RH; ISO 527-1/-2
拉伸模量2.00 GPa290 ksi50%RH; ISO 527-1/-2
 3.60 GPa522 ksiDAM; ISO 527-1/-2
剪切模量0.175 GPa@Temperature 160 °C25.4 ksi@Temperature 320 °FDAM; Dynamic; ISO 11403-1 -2
 0.214 GPa@Temperature 120 °C31.0 ksi@Temperature 248 °FDAM; Dynamic; ISO 11403-1 -2
 0.449 GPa@Temperature 70.0 °C65.1 ksi@Temperature 158 °FDAM; Dynamic; ISO 11403-1 -2
 1.0685 GPa@Temperature 20.0 °C154.98 ksi@Temperature 68.0 °FDAM; Dynamic; ISO 11403-1 -2
 1.171 GPa@Temperature -20.0 °C169.8 ksi@Temperature -4.00 °FDAM; Dynamic; ISO 11403-1 -2
 1.259 GPa@Temperature -50.0 °C182.6 ksi@Temperature -58.0 °FDAM; Dynamic; ISO 11403-1 -2
抗剪强度0.0670 MPa@Shear Rate 500 1/s, Temperature 315 °C9.72 psi@Shear Rate 500 1/s, Temperature 599 °FISO 11403-1 -2
 0.0975 MPa@Shear Rate 500 1/s, Temperature 295 °C14.1 psi@Shear Rate 500 1/s, Temperature 563 °FISO 11403-1 -2
 0.142 MPa@Shear Rate 500 1/s, Temperature 275 °C20.6 psi@Shear Rate 500 1/s, Temperature 527 °FISO 11403-1 -2
割线模量1.66 GPa@Strain 3.84 %, Temperature 40.0 °C240 ksi@Strain 3.84 %, Temperature 104 °FDAM; ISO 11403-1 -2
 2.17 GPa@Strain 1.92 %, Temperature 40.0 °C314 ksi@Strain 1.92 %, Temperature 104 °FDAM; ISO 11403-1 -2
 2.375 GPa@Strain 0.480 %, Temperature 40.0 °C344.5 ksi@Strain 0.480 %, Temperature 104 °FDAM; ISO 11403-1 -2
 2.52 GPa@Strain 3.84 %, Temperature 23.0 °C365 ksi@Strain 3.84 %, Temperature 73.4 °FDAM; ISO 11403-1 -2
 2.7381 GPa@Strain 5.04 %, Temperature -20.0 °C397.13 ksi@Strain 5.04 %, Temperature -4.00 °FDAM; ISO 11403-1 -2
 2.77 GPa@Strain 4.40 %, Temperature 0.000 °C402 ksi@Strain 4.40 %, Temperature 32.0 °FDAM; ISO 11403-1 -2
 3.41 GPa@Strain 1.92 %, Temperature 23.0 °C495 ksi@Strain 1.92 %, Temperature 73.4 °FDAM; ISO 11403-1 -2

更多产品