| MONEL 190/ENiCu-7焊条 MONEL 60 焊丝主要用于用钨极惰性气体保护焊、熔化极气体保护焊和埋弧焊等方法焊接MONEL400合金、R404合金以及K-500合金，也可用于熔化极气体保护焊和埋弧焊进行钢材的表面堆焊。对特定的熔化极气体保护焊接条件下，推荐使用NICKLE 61镍焊丝盖面。用MONEL 60焊丝进行埋弧焊接需要使用INCOFLUX5焊剂。用MONEL 60焊丝形成的焊缝金属具有和MONEL 400合金相似的性能－高强度，在多种介质中作用下都有较强的耐蚀能力，这些腐蚀介质包括海水、盐类以及还原性酸等。当用这种焊条焊接MONEL K-500合金时，由于焊缝填充金属不能产生时效硬化效果，所以强度较母材低。 |
| AWS A5.14,ERNiCu-7 DIN 1736 SG-NiCu30MnTi MIL-E-21562 Types MIL-RN60,MIL-EN60 Werkstoff Nr.2.4377 ASME Ⅱ,SFA-5.14,ERNiCu-7 UNS N04060规格 ASME Ⅸ,F-No.42 ISO SNi4060 VdTüV2165.00;2114.00 Europe ENiCu30Mn3Ti BS 2901(NA33) |
| Nia-----------62.0-69.0 Cu-----------剩余化学 C ----------- 0.15 max Al ----------- 1.25 max成份 Mn ----------4.0 max Ti-------------1.5-3.0 Fe -----------2.5 max P ------------ 0.020 max S ------------ 0.015 max 其它 --------- 0.50 max Si ----------- 1.25 max |
| 最低 拉伸强度，psi 70,000性能 MPa 483 延伸率，(4d）% 30 |
| 焊丝可以以线卷或直线状供货，并有几种不同直径可供选择，如下表所示:mm 0.8 0.9 1.0 1.14 1.2 1.6 2.4 3.2in 0.030 0.035 0.040 0.045 0.047 0.062 0.093 0.125 |
| 注:本材料中所介绍的都是本公司的典型产品及其性能，并不是产品的技术说明书。INCONEL,MONEL,INCOLOY,INCO-WELD,INCOFLUX,INCO-CORED,NI-ROD,686CPT以及725NDUR为SMC国际超合金集团焊接产品公司的注册商标。 |
| MONEL 190/ENiCu-7焊条 MONEL 190焊条可应用于MONEL400，R-405和K-500合金的手工电弧焊中，也可用于钢的表面堆焊。这种金属可抵抗海水，盐类以及还原酸性物质的侵蚀。用这种焊条形成的焊缝能满足苛刻的X射线照相探伤要求。需要说明的是，虽然用这种焊条焊接MONEL K-500合金可形成性能优异的接头，但与母材不同的是，焊缝填充金属不能产生时效硬化效果，所以相对强度较低。MONEL 190焊条具有广泛的应用范围可以用于异种材料的焊接，如MONEL镍－铜合金与碳钢、低合金钢、铜及铜镍合金的焊接。 |
| AWS A5.11,ENiCu-7 DIN 1736 EL-NiCu30Mn MIL-E-22200/3 Type MIL-9N10 UNS W84190规格 ASME Ⅱ,SFA-5.11 ENiCu-7 Werkstoff Nr.2.4366 ASME IX,F-No.42 ISO ENi4060 VdTüV2106.00 Europe ENiCu30Mn3Ti |
| Ni+Co ------- 62.0-68.0 Cu-----------剩余化学 C ------------- 0.15 max Al---------- 0.75 max成份 Mn ------------4.0 max Ti ----------1.0 max Fe ------------2.5 max P ---------- 0.02 max S ------------- 0.015 max 其它 ------- 0.50 max Si -------------1.0 max |
| 最低 拉伸强度，psi 70,000性能 MPa 483 延伸率，(4d）% 30 |
| 产品供货状态直径 mm 2.4 3.2 4.0 4.8 in 3/32 1/8 5/32 3/16长度 mm 229 356 356 356 in 9 14 14 14电流 A 55-75 75-110 110-150 150-190 |
| 注:本材料中所介绍的都是本公司的典型产品及其性能，并不是产品的技术说明书。INCONEL,MONEL,INCOLOY,INCO-WELD,INCOFLUX,INCO-CORED,NI-ROD,686CPT以及725NDUR为SMC国际超合金集团焊接产品公司的注册商标。 |
MONEL 60/ERNiCu-7 wire
MONEL 60 welding wire is mainly used to weld MONEL400 alloys, R404 alloys and K-500 alloys by means of tungsten inert gas shielded welding, molten gas shielded welding and submerged arc welding, It can also be used for surface surfacing of steel by gas shielded welding and submerged arc welding. Under certain conditions of gas shielded welding, NICKLE 61 nickel wire cover surface is recommended. INCOFLUX5 flux is needed for submerged arc welding with MONEL 60 wire. Weld metal formed with MONEL 60 wire has similar properties to MONEL 400 alloys - high strength, Strong corrosion resistance in various media, These corrosive media include seawater, salts and reductive acids. And when welding MONEL K-500 alloy with this electrode, Because the weld filling metal can not produce aging hardening effect, So the strength is lower than the base metal.
AWS A5.14,ERNiCu-7DIN 1736SG-NiCu30MnTi
MIL-E-21562Types MIL-RN60,MIL-EN60Werkstoff Nr.2.4377
ASME Ⅱ,SFA-5.14,ERNiCu-7UNS N04060
ASME Ⅸ,F-No.42ISO SNi4060 specifications
VdTuV2165.00;2114.00Europe ENiCu30Mn3Ti
BS 2901(NA33)
Nia-----------62.0-69.0Cu ----------- surplus
Chemical C -----------0.15max Al -----------1.25max
Mn ----------4.0max Ti-------------1.5-3.0 ingredients
Fe -----------2.5max P ------------0.020max
Other S ------------0.015max -0.50 max
Si -----------1.25max
Minimum tensile strength, psi 70,000
MPa 483 performance
elongation ,(4 d)%30
The wire can be supplied in a linear or linear form with several different diameters to choose from, as shown in the following table:
mm 0.8 0.9 1.0 1.14 1.2 1.6 2.4 3.2
in 0.030 0.035 0.040 0.045 0.047 0.062 0.093 0.125
Note: all the typical products and properties of our company are introduced in this material, It's not the technical specification of the product. INCONEL, MONEL, INCOLOY, INCO-WELD, INCOFLUX, INCO-CORED, NI-ROD, 686CPT and 725 NDUR are registered trademarks of SMC International Superalloy Group Welding products Company.
MONEL 190/ENiCu- electrode
MONEL 190 electrode can be used in manual arc welding of MONEL400,R-405 and K-500 alloys or in surface surfacing of steel. This metal can resist the erosion of seawater, salts and reduced acids. Weld formed with this electrode can meet the harsh requirements of X radiographic inspection. Although MONEL K-500 alloy welded with this electrode can form joints with excellent properties, unlike base metal, weld filling metal can not produce aging hardening effect, so the relative strength is low. MONEL 190 electrode has a wide range of applications and can be used for materials, such as MONEL nickel-copper alloy and carbon steel, low alloy steel, copper and copper-nickel alloy welding.
AWS A5.11,ENiCu-7DIN 1736EL-NiCu30Mn
MIL-E-22200/3Type MIL-9N10UNS W84190
ASME Ⅱ,SFA-5.11ENiCu-7Werkstoff Nr.2.4366 specifications
ASME IX,F-No.42ISO ENi4060
VdTuV2106.00Europe ENiCu30Mn3Ti
Ni Co -------62.0-68.0Cu----------- surplus
Chemical C -------------0.15max Al----------0.75max
Mn ------------4.0max Ti ----------1.0max ingredients
Fe ------------2.5max P ----------0.02max
S -------------0.015max other ---0.50 max
Si -------------1.0max
Minimum tensile strength, psi 70,000
MPa 483 performance
elongation ,(4 d)%30
Product Supply Status
mm 2.4 diameter 3.2 4.0 4.8
in 3/32 1/8 5/32 3/16
mm 229 length 356 356 356
in 9 14 14 14
Current A 55-75 75-110 110-150 150-190
Note: all the typical products and properties of our company are introduced in this material, It's not the technical specification of the product. INCONEL, MONEL, INCOLOY, INCO-WELD, INCOFLUX, INCO-CORED, NI-ROD, 686CPT and 725 NDUR are registered trademarks of SMC International Superalloy Group Welding products Company