服务中心已遍及华北、华东和华南等地区。主要负责百达翡丽、爱彼、江诗丹顿、芝柏、宝玑、宝珀、朗格、劳力士、积家、卡地亚、欧米茄、万国、浪琴等国内外大小五十多个手表品牌的售后维修工作.专业的维修技术、透明的维修价格、当面检测维修定价、立等可取的维修效率。电话预约可享9折优惠！专业专注，专心服务!让时间鉴定品质!瑞亨名表维修中心，您身边的手表养护专家!

　　________________________________________________________________________________________________________________

　　________________________________________________________________________________________________________________

　　瑞亨是一家历史悠久全国连锁的钟表公司，本公司实力雄厚、信誉良好、维修技术过硬并有国家级技术师、高级技师、专业技师等一大批技术人员，国家级技师有从事名表维修四十多年的维修经验，可专业维修各种世界名表，并可以为您的名表现场维修、立修立取。并且公司秉承"服务至上、追求卓越"的经营理念，坚持"诚信为本，顾客至上"的原则。以专业的技术和资源配置为顾客提供满意的销售和优质的维修服务。作为表壳表面的工艺，基本上有两种:抛光的和拉砂的，或者两者兼有，修磨手表表壳上的划伤，也要按照原来的工艺去做，大面积的毛道类的磨损，比较好办但是若有比较深的硬划伤，就要麻烦些，因为无论是抛光或者拉砂的手法，都不足以磨去这样的划痕。手持的工具也有讲究，建议使用外科手术上的止血钳，只取一小块砂纸，对折后用止血钳夹紧，平行于原来的纹路做拉砂，蓝宝石玻璃比较坚硬，可以不考虑它，但手表的壳是不锈钢的，操作时一定要注意，不可划蹭到它，必要时可用胶纸覆盖住它。技术性的方面，在于一定要所有的拉砂纹路都要走向一直，而且都是以表盘中心起，并呈放射状的。自己用砂纸给表壳表带上面的划痕修整，并不是件难事，只要细心手稳就都能做好但对于表面是抛光的工艺，那就必须使用布轮抛光机了，普通人干不了。对于又有拉砂又有抛光工艺的表壳和表带，修整的时候应该先做拉砂打磨，然后再做抛光打磨，只不过是需要把已经修整好的拉砂部位给遮盖上，简单的可以用胶纸，正规些的就要做金属模板了，同样用于抛光时的遮盖。 as a process case surface, basically of two kinds: polishing and sand, or both, grinding watch case on the scratch, but also in accordance with the original process to do a large area of hair road wear, but relatively easy to handle if hard scratch is deep, will be trouble some, because both polishing and sand drawing techniques, are not enough to remove the scratches. hand tools also pay attention to, recommend the use of hemostatic forceps to surgery, just take a piece of sandpaper, folded after the use of hemostatic clamp tightly, parallel to the original lines do pull sand, sapphire glass is hard, can not consider it, but watch the shell is made of stainless steel, must pay attention to the operation, not it can be divided into the rub, cover tape can be used when necessary. Technical aspects, it is certain that all of the pull sand lines have to go all the time, but also from the center of the dial, and a radial. Their use sandpaper to repair scratches watchcase watchband above, is not difficult, as long as careful steady hand could do but for the surface polishing process, it must use the polishing machine, ordinary people can not do. For and pull sand and polishing watchcase and watchband, dressing time should first pull sand, and then polished, just need to have trimmed to cover the upper part of the pull sand, simple to use tape to do more of the regular metal template, the same for the polishing of the cover.