济南天鑫数控设备有限公司

　　1、电力方面。由于断桥铝门窗设备常用电压时380V的，所以大家在接线的时候一定要注意火线和零线的连接。

　　1, electric power. Because of the common voltage aluminum doors and windows equipment 380V, so we must pay attention to when wiring connection live wire and zero line.

　　这个一般来讲，门窗设备厂家都会分出眼色，火线为黑色或者蓝色，零线为红色(各个工厂根据自己的情况而定)。如果火线接反了，就在火线的两端随便倒换两根即可。

　　The general equipment manufacturers will look out of doors and windows, FireWire is black or blue, red (zero line factories and according to their own situation). If the FireWire reversed, in the front ends of the two can be easily switched.

　　2、设备方面。由于断桥铝门窗设备分类众多，每种设备可能都有好几款机器。对于门窗设备的检查尤为重要，比如切割锯的气管插头、锯片进出速度、锯头左右工作状态等等。

　　2, equipment. Because the aluminum doors and windows equipment classification is numerous, each kind of equipment may have several machines. For the doors and windows of the inspection equipment is particularly important, such as cutting saw the trachea plug, saw blade in and out speed, saw the head of the state of work, etc..

　　3、气源方面。由于断桥铝门窗设备的压料都是气缸压紧，因此保证充足的供气量是设备高效使用的一个前提。如果，气压达不到，断桥铝型材双头切割锯的锯片进出就会受到影响，相应地加工效果也会受到影响。

　　3, gas source. By pressing the aluminum doors and windows equipment are pressing cylinder so as to ensure adequate supply, is a prerequisite for the efficient use of equipment. If the pressure is not up to the aluminum bridge, double head cutting saw blade import will be affected, the processing effect will be affected.

　　一般来讲，一套断桥铝门窗设备要保证气压能够达到8个压，供气流量达到0.3。如果设备过多，仅仅靠气泵是不够的，需要大家准备一两个储气罐。

　　Generally speaking, a set of aluminum doors and windows equipment to ensure the pressure can reach 8 pressure, air flow rate reached 0.3. If the equipment is too much, just by the pump is not enough, we need to prepare one or two gas tank.

　　公司铝门窗加工机器可完成铝型材的切割，组角，钻孔，冲孔，弯圆等工序，塑钢门窗设备可 完成型材切割，焊接，铣削，清理等工序。十大系列，四十余个品种设备，均得到了广大新老客户的一致好评。

　　济南天鑫数控设备有限公司

　　诺商基于多年的优化经验和品牌基础推出的诺商商道系统，诺商信息您身边的互联网专家！