Models of DC dimmable LED drivers are listed below, if need further details, please feel free to contact us, or visit our company website for the updated details. Thanks! Input AC voltage:85-265V for all models are listed below:
36W--(7-12)X3W--DC OUTPUT:24-51V/680mA±5%
60W--(12-20)X3W--DC OUTPUT:30-76V/680mA±5%
75W--(18-25)X3W--DC OUTPUT:45-102V/680mA±5%
90W--15-30)X3W--DC OUTPUT:48-118V/680mA±5%
30W--(18-30)X1W--DC OUTPUT:52-102V/320mA±5%
40W--(30-40)X1W--DC OUTPUT:90-136V/320mA±5%
50W--(40-50)X1W--DC OUTPUT:120-165V/320mA±5%
60W--(25-60)X1W--DC OUTPUT:80-206V/320mA±5%
Models listed above are installed in series for all LED beads. The user can install flexibly in series or in parallel according to their own needs.
Note: A wireless remote dimmable LED driver can be operated with many remote controllers, a remote controllers can controll many wireless remote dimmable LED drivers, use it simply and conveniently. The remote controller is compact, easy to carry.
Maxwell Technology has dedicated to design and production of the wireless remote control dimmable LED driver, let the light reach you anytime, whenever you are sitting or walking, the bright is controlled in your hands. The moon is subject to the changes of being full and crescent, cloudy and clear, the light has bright，grey or dark illumination, saving energy and reducing consumption, daily whenever and wherever the light will be controlled by you! You pay attention to our products, we are concerned about your life!
The characteristics of the wireless remote control dimmable LED driver: Using high-tech wireless decoding advanced remote control technology, various measures of the safety protection circuits are taken as safe and reliable use for user, MTBF is 50000 hours or more, the remote control distance is up to 30-100 meters (remote control distance varies relative to transmission power of the remote)，there are five stages wireless remote dimmable brightness up to0%, 0.5%,25%, 50%, 100%，flicker free, dimming linearity, long life, convenient to use, ultra low standby power consumption, energy saving and environmental protection, remote control switch on-off, the first choice of the green energy-saving lighting products recommended by modern energy-saving lighting engineers, the ideal partner for modern urban household and commercial green lighting, the light reaching you anywhere and anytime. Stepped dimming, light up your life to be promoted step by step!
The characteristics of the handheld remote controller: There are a four-key remote controller, flexible operating push-button, zero standby power consumption, nice appearance, Small in size, compact structure, excellent performance, quick action and high sensitivity, the use of DC12V/23A as a battery, long standby time.
Operating principle of function keys: Operation(Press the button) of the A key to switch on, brightness is 0.5%, brightness of operation the B key is 25%, the C key is 50%，the D key is 100%，swithching off is 0%, operation of the A key is to switch on-off power supply delaying for 3 seconds, only when operation of the A key is to switch power supply on and AC power supply of the wireless remote dimmable driver is switched on, it is effective to operate the key of the remote controller.
The characteristics of remote device:The remote control device uses UHF encryption coding technology, has stronger anti-interference ability, longer distance transmission, and radio transmitting is not blocked by the wall barrier, operation is simple, flexible and easy.
Learning code set-up method: In the replacement of the remote controller or in a multiuser environment, it is possible to set up the learning code. When the wireless remote dimmable driver is connected to AC power supply, the red LED indicator of the wireless remote dimmable driver is on, to press and hold the learning button on the wireless remote dimmable driver until the red, the green LED indicator are off, immediately relax the learning button, and then press any key on the remote controller, if the green LED or red LED flashes, the learning code sets up successfully, after finish learning code set-up and enter into the standby state. You can set up the learning code compatible with 16 remote controllers at most. The learning code has finished before dilivery, uers do not need to set up. Set-up learning code facilitates the users to replace remote controller or carry out multi-user real-time control(one-to-one, one-to-many, many-to-one).
Clearing learning code: To press and hold the learning button on the wireless remote dimmable driver until the red LED indicator flashes, clear the learning code successfully.
The basic accessories: Radio wireless remote dimmable LED driver 1 set, remote controller 1 set (includes DC12V/23A battery 1 set).
This product instructions are only for the wireless remote control dimmable LED driver and the basic accessories, other parts are not included. If necessary, we can provide other parts, but you shall pay for other parts normally.
Installation and Cautions:
Input AC voltage of the dimmable LED driver is 100-240VAC, universal input voltage range is 85-265VAC. Beyond the specified voltage range of products is not safe to avoid some accidents, a qualified operator is recommended to install and wire.
1）Do not set up with power on, after proper installation and confirm the connection are correct then turn on the power.
2）The wireless remote dimmable driver should avoid being installed on a metal plate or in the metal shielding places, in order to avoid and reduce the product sensitivity.
3）In strict accordance with the wiring diagram to install, otherwise there will be damage to the products.
4）Due to installation of the remote devices in different places and buildings, various attenuation on blocking radio signals can appear, the distance of remote control will be different, remote control signal is not exactly the same, when the remote control distance is very far, properly change the remote direction and pull the antenna out.
5）When the battery in the remote controller is exhausted, the remote indicator becomes darker, the remote control distance becomes shorter or is out of control, should be replaced with the same battery promptly.
6）The power devices within the dimmable LED driver and the wireless remote dimmable driver, producing a little hot is normal on the surface.
7）The input AC cables(L,N) and the output DC cables of the dimmable LED driver can be extended freely according to your convenience.
8）The output DC cables are connected to LED light, after proper installation and confirm the connection are correct then turn on the power.
9) Input AC cables of the wireless remote dimmable LED driver are connected to AC power supply, normally L is connected to the live cable，N to the neutral cable. Don't cross the cables, so as to avoid short circui