织物图样:机台特色:♦电脑提花机系列为本公司融合多年机械加工技术和针织编织工艺经验，而最新研制开发的机型。♦主体机架采用制振能优异的铸铁制造，辅之以合理的加强筋机构设计，减小变形增加刚性。♦大盘齿轮跟大盘、大鼎齿轮跟大鼎之间的定位支撑采用专利的特殊结构设计，大大降低齿轮运转产生的噪音，不仅改善齿轮运转环境，也提高机台运转角度。♦选针系统采用日本WAC公司的电脑选针器，

　　二、三功位电脑选针技术，可编制花形范围不受限制的各种织物。八段式选针器的选针距离空间可满足机器高速运行的需求。♦本机采用电脑选针器在针筒上进行选针，编织花形范围不受限制的提花织物。电脑选针器可作出成圈、集圈和浮线三功位选针。任何复杂组织结构物的工艺图案均可通过电脑花形准备系统转换成专门的控制指令。这些指令控制针机械上的电脑选针器编织单面大提花织物，织物底部则由针盘两跑道排阵编织。♦精密的编码器可准确地计算出织针的位置和校正零位，该编码器也能够自动地校正开机和停机时因惯性形成的误差，为了选针的准确性。另外还增加了一个探测器来追加校零作用，控制系统能够检查编码器，判断编码器的信号是否适当，从而保证了整个系统的稳定性。

　　FEATURES OF KNITTING MACHINES:♦ComputerrizedJcquard series were the newest machine developed by our company based on years of experience in machine work technology and knitting and weaving process♦The main frame is made from cast iron with excellent anti-vibration capability and provided with reasonable design of reinforcing rib structure that can reduce possibility of deformation and increase rigidityDesign of location between main plate gear and main plate, top gear and top adopts a special patent structure and can reduce the noise produced by gear greatly, not improving the operation of gear, but also promoting precision of the whole machine.♦Needle selection system adopts the needle selection unit manufactured by WAC of Japan, of which 2 or 3 bits selection technology can weave all kinds of fabric free from limitations on pattern. Selection unit can meet the demand of high-speed operation of the machine.♦The machine selects needles in cylinder and can weave fabric of which patterns are not limited. The selection unit can select needle for three ways of knitting, including loop, tuck and float. Any kind of complicated pattern can be transferred into specific control instructions by computer-aided pattern system accurately and systematically. These instructions can control the needle selection unit to weave large patterns on single-side of a fabric; as for the bottom side, it will be weaved by twin-raw faller on the dial.♦Precise encoder can calculator the position and calibration zero position of needle accurately ，also can calibrate any error due to the force of inertia during start and stop automatically；in addition，a detector is added to assist zero calibration for accuracy of selection；thus the control system can check the encoder，judge whether its signal is proper and ensure stability of the whole system. 技术规格/Technical Data:型号（MODEL）针筒直径（Diameter）针距（GAGUE）进纱路数（NO.OF FEEDERS）双面电脑提花机Double Jacquard Knitting Machine 34＂22G18F