环氧树脂漆 施工时，须注意天气和温度的变化，雨、雾、雪天或相对湿度大于80%时，不宜施工。

　　Epoxy resin paint when construction, must pay attention to the weather and temperature changes, rain, fog, snow or relative humidity greater than 80%, not construction.

　　环氧树脂漆 进行厚涂施工时，以不流淌为宜，配制时一般不必加入稀释剂，但若环境温度过低，粘度较大时，可添加稀释剂1%～5%，同时适当增加固化剂。

　　环氧树脂漆涂装时要进行外观检查，对涂装的管道须逐根检查，并做到防腐涂层平整，无皱折和鼓气。然后进行针孔检查，可用电火花检漏仪检测，中等级为2000V，加强级为3000V，特加强级为5000V，平均每45㎡发生火花不超过1处，即为合格。如不合格，针孔处须补涂。

　　Epoxy resin paint coating to check the appearance, of coating of pipeline shall be inspection by root, and achieve anticorrosive coating is smooth, wrinkle free and air blowing. And then checking pinhole, electric spark leak detector can test, grade 2000V and strengthen the level is 3000V, reinforced 5000v, average 45 square meters each spark is less than 1, which is qualified. If not qualified, the pinhole must be coated.

　　环氧树脂漆 补口方法，补口防腐层与管体防腐层的搭接不少于100mm，搭接处的表面处理需达到St3，擦净、无污物。

　　An epoxy resin paint repair method, the joint anti corrosion layer and the pipe body corrosion protection layer of not less than 100mm, lap joint surface treatment need to reach St3, clean, no dirt.

　　坚持“用户第一”理念，为用户创造价值、维护用户正当利益是经营的第一要务保持对用户需求的敏感，重视用户的消费体验，服务水准适当超出用户的期望；注重培育用户的满意度和忠诚度，不断提高与用户沟通的服务水准；以用户价值的最大化创造公司价值的最大化。

　　Adhere to the "customer first" philosophy, for the user to create value, maintaining the legitimate interests of the user is the first priority of business remain sensitive to the needs of the user, and pay attention to the user experience, appropriate standard of service beyond customer expectations; pay attention to fostering customer satisfaction and loyalty, continuously improve the service level and user communication; in order to maximize the value to the user create the maximization of corporate value.