创惟科技 GL823K-HCY04 闪存卡读取器单芯片

　　FEATURES

　　► USB specification compliance

　　Comply with 480Mbps Universal Serial Bus specification rev. 2.0

　　Comply with USB Storage Class specification rev. 1.0

　　Support one device address and up to four endpoints: Control (0)/Bulk Read (1)/Bulk Write (2)/Interrupt (3)

　　►Integrated USB building blocks

　　USB2.0 transceiver macro (UTM), Serial Interface Engine (SIE), Build-in power-on reset (POR) and low-voltage detector (LVD)

　　► Embedded 8051 micro-controller

　　Operate @ 60 MHz clock, 12 clocks per instruction cycle

　　Embedded mask ROM and internal SRAM

　　► Secure DigitalTM (SD) and MultiMediaCardTM (MMC)

　　Supports SD specification v1.0 / v1.1 / v2.0 / SDHC (Up to 32GB)

　　Compatible with SDXC (Up to 2TB)

　　Supports MMC specification v3.x / v4.0 / v4.1 / v4.2

　　Supports 1 / 4 bit data bus

　　Compliant with Secure DigitalTM v5.0

　　► Memory Stick PRO / Memory Stick PRO Duo / Memory Stick PRO-HG / MS Micro (M2)

　　Compliant with Memory Stick Series Specification: MS PRO v1.05, MS PRO-HG Duo 1.03, MS Micro (M2) v1.06

　　Support 4bit data bus

　　► Support boost mode for SD3.0 for better performance

　　► Support non-SD Card Detect pin, non-MS Insertion/Removal pin design to save BOM cost

　　► Support non-SD Write Protection pin design to save BOM cost

　　► Support LED function to indicate power and access status

　　► On chip clock source and no need of 12MHz Crystal Clock input

　　► On-Chip 5V to 3.3V and 3.3V to 1.8V regulators

　　► On-Chip power MOSFET for supplying flash media card power

　　► Support USB disconnection by memory card unplug or manual switch for Mobile cable/ OTG reader/ PC card reader application

　　► Available in SSOP16 package (150 mil)