致新数字温度计 G780P81U MSOP-8封装
General Description
The G780 is a precise digital thermometer that reports the temperature of both a remote sensor and its own package. The remote sensor is a diode-connected transistor typically a low-cost, easily mounted 2N3904 NPN type that replace conventional thermistors or thermocouples. Remote accuracy is ±1°C with no calibration needed. It also has a build-in noise filtering function in remote sensor measuring the diode temperature. The remote channel can also measure the die temperature of other ICs, such as microprocessors, that contain an on-chip, diode-connected transistor.
The 2-wire serial interface accepts standard System Management Bus (SMBus) Write Byte, Read Byte, Send Byte, and Receive Byte commands to program the alarm thresholds and to read temperature data. The data format is 11bits plus sign, with each bit corresponding to 0.125°C, in two’s-complement format. Measurements can be done automatically and autonomously, with the conversion rate programmed by the user or programmed to operate in a single-shot mode. The adjustable rate allows the user to control the supply current drain.
Features
► Two Channels: Measures Both Remote and Local Temperatures
► Measure Thermal Diode with a Transistor Model
► No Calibration Required
► Built-in Noise-Buster for Remote Sensor
► SMBus 2-Wire Serial Interface
► Programmable Under/Overtemperature Alarms
► Supports SMBus Alert Response
► Accuracy:
±1°C (+60°C to +100°C, remote)
±3°C (+60°C to + 100°C, local)
► 320μA (typ) Average Supply Current During Conversion
► Measure Thermal Diode with Transistor Model
► Support 45nm, 65nm and 90nm CPU thermal diode
► +3V to +5.5V Supply Range
► Remote Temperature Measurment up to 160°C by using offset shifting method (see “Measure Remote Temperature Higher Than 127°C” section)
Applications
► Desktop and Notebook
► Central Office
► Computers
► Telecom Equipment
► Smart Battery Packs
► Test and Measurement
► LAN Servers
► Multi-Chip Modules
► Industrial Controllers