GL3523-S3 电子元器件 GENESYS/创惟科技 封装VFBGA144USB3.1一代集线器控制器

　　DESCRIPTION

　　Genesys GL3523 is a 4-port, low-power, and configurable hub controller. It is compliant with the USB 3.1 specification. GL3523 integrates Genesys Logic self-developed USB 3.1 Gen 1 Super Speed transmitter/receiver physical layer (PHY) and USB 2.0 High-Speed PHY. It supports Super Speed, Hi-Speed, and Full-Speed USB connections and is fully backward compatible to all USB 2.0 and USB 1.1 hosts. GL3523 also implements multiple TT* (Note1) architecture providing dedicated TT* to each downstream (DS) port, which guarantees Full-Speed(FS) data passing bandwidth when multiple FS devices perform heavy loading operations. Furthermore, GL3523 has built-in 5V to 3.3V and 5V to 1.2V regulators, which saves customers’ BOM cost, and eases for PCB design.

　　GL3523 features the native fast-charging and complies with USB-IF battery charging specification rev1.2, it could fast-charge Apple, Samsung Galaxy devices, and any device complaint with BC1.2/1.1. It also allows portable devices to draw up to 1.5A from GL3523 charging downstream ports (CDP1) or dedicated charging port (DCP2). It can enable systems to fast charge handheld devices even during “Sleep” and “Power-off” modes.

　　With different part numbers, GL3523 also has USB Type-C function integrated (GL3523-S).

　　FEATURES

　　Compliant with USB 3.1 Gen 1 Specification

　　Upstream port supports SuperSpeed (SS), HighSpeed (HS) and FullSpeed (FS) trfic

　　Downstream ports support ss, HS, FS, and LowSpeed (LS) traffic

　　1 control pipe and 1 interupt pipe

　　Backward compatible to USB specification Revision 2.0/1.1

　　Native USB Type-C support in GL3523-S series

　　Compliant with USB Type-C Cable and Connection Specification Revision 1.0

　　Featuring USB Type-C functions

　　Detecting flip-able/reversible plugging

　　Discovering/configuring VBUS

　　Supporting USB Type-C Current modes，including USB Default, 1.5A@5V, 3A@5V

　　Configuring/Supporting VCONN Power and having VCONN over -current protection

　　Featuring fast-charging on all downstream ports and upstream port

　　Compliant with USB Battery Charging Revision v1.2, supporting CDP, DCP, and ACA-Dock

　　Downstream ports can be turned from a Standard Downstream Port (SDP) into Charging Downstream

　　Port (CDP) or Dedicated Charging Port (DCP)

　　- Downstream devices can be charged while upstream VBUS is not present, which can be applied on wall

　　charger applications

　　Upstream port is capable of charging and data communicating simultaneously for portable devices

　　supporting ACA Dock or proprietary charging protocols

　　Supporting Apple 1A/2. 1A/2.4A and Samsung Galaxy devices fast-charging

　　On-chip 8-bit micro-processor

　　RISC-like architecture

　　USB optimized instruction set

　　1 cycle instnuction execution (maximum)

　　Performance: 12 MIPS @ 12.5MHz (maximum)

　　With 256-byte RAM, 20K-byte internal ROM, and 24K-byte SRAM

　　Multiple Transaction Translator (TT) architecture

　　Providing dedicated TT control logics for each downstream port

　　Superior performance when multiple FS devices operate concurrently

　　Integrated USB transceiver

　　Improving output drivers with slew-rate control for EMI reduction

　　Internal power- fail detection for ESD recovery

　　Advanced power management and low power consumption

　　- Supporting USB 3.1 U0/U1/U2/U3 power management states

　　- Supporting USB Link Power Management (LPM) L0/L1/L2

　　-Supporting individual/gang mode over-current detection for all downstream ports

　　-Supporting both low/high-enabled power switches

　　-Patented Smart Power Management

　　Configurable sttings by firmware in SPI flash

　　Configurable charging port

　　-Configurable 4/3/2 downstream ports, downstream port can be disabled/enabled by each specific port

　　for USB3.1/USB2.0

　　- Configurable Upstream and Downstream Ports in GL3523-S

　　-Supporting multiple upstream ports in GL3523-S packages

　　- Supporting full in-system programming firmware upgrade by SPI flash and configuration by EEPROM

　　-Supporting compound-device (non-removable setting on downstream ports)

　　-Supporting customization VID/PID

　　Flexible design

　　- Supporting Poly fuse/Power-switch

　　Automatic switching between self- powered and bus-powered modes

　　Supporting electrical tuning for each specific port

　　Supporting programmable breathing LED

　　Supporting register setting by firmware

　　Supporting vendor command and SMBUS

　　Allow downstream ports to connect up to 8 devices, 4 x USB3.1 non-removable devices with 4 x

　　USB2.0 non-removable devices or exposed ports

　　LowBOMcost

　　Single external 25 MHz crystal / Oscillator clock input

　　Built-in upstream port 1 5K9 pull-up and downstream port 15KQ pull-down resistors

　　Built-in5to3.3V and5 to 1.2V regulator

　　Different package types available for various applications

　　Applications

　　- Standalone USB hub/Docking station

　　Tablet/UltrabookNB

　　Motherboard

　　Monitor built-in hub, GPIOs can be programmed as I2C interface to easily update scalar firmware

　　through USB interface

　　TV built-in hub

　　Compound device, such as hub-reader application

　　USB wall charger

　　Other consumer electronics

　　- Customized applications

　　Dynamically disable/enable ports

　　GPIO signaling of ambient light sensor or rotation/position sensor