GB型钢板丁基腻子止水带即是国标型钢板丁基腻子橡胶止水带

　　GB type steel plate butyl putty waterproof belt is the national standard steel plate butyl putty rubber water stop belt

　　GB型钢板丁基腻子止水带是采用优质镀锌薄钢板,上下两面外贴一层丁基橡胶而成的新型止水产品。贴合的丁基橡胶是由特种橡胶,防老剂等材料经过混炼,挤出等工艺加工而成。

　　GB type steel plate butyl putty water stop strip is a new type of water stop product made of high quality galvanized steel sheet, with a layer of butyl rubber sticking on both sides of the upper and lower sides. Butyl rubber is attached by special rubber antioxidant materials after mixing, extrusion processing and etc..

　　GB型钢板丁基腻子橡胶止水带利用特种丁基橡胶与砼土的高粘特性和钢板的钢性,使止水带具有在各种承载下均可紧固密封,起到防水,止水的作用。适用于基础工程、地下设施、隧道、地铁、给排水工程、涵洞等结构接缝处的密封防水。

　　The GB type steel plate butyl putty rubber water stop belt uses the special butyl rubber and the concrete soil the high viscosity characteristic and the steel plate steel nature, causes the water stop belt to be able to bear under all kinds of load may the fastening seal, plays the waterproof, the water stop function. It is suitable for sealing waterproof of joints of foundation engineering, underground facilities, tunnels, subways, water supply and drainage works, culverts and so on.

　　国标钢板丁基腻子止水带产品规格

　　Specification of national standard steel plate butyl putty water stop belt

　　主要有六种规格(宽mm×厚mm):200×6、250×6、300×6、350×8、400×8、500×10等。

　　There are six main specifications (width mm * thickness mm): 200 x 6, 250 x 6, 300 x 6, 350 x 8, 400 x 8, 500 x 10, etc..

　　钢板丁基腻子止水带的特点

　　Characteristics of steel plate butyl putty water stop belt

　　1. 丁基橡胶粘接力强,延伸性大,在一定压力下,能填充砼土中的气孔和缝隙,使其与砼土联接为一体,提高了防水性能。

　　1. butyl rubber has strong adhesion and extensibility. Under certain pressure, it can fill the pores and crevices in the concrete soil, and make it connect with the concrete soil as a whole, which improves the waterproof performance.

　　2. 支撑力好易于固定,施工方便。

　　2. the supporting force is good, easy to fix and convenient to construct.

　　3. 抗拉、扯断性强度高。

　　3., the tensile tensile strength is high.

　　4. 具有良好的耐候、耐腐蚀、耐老化性能,并且使用寿命长。

　　4. has good weather resistance, corrosion resistance, anti-aging properties, and long service life.

　　施工与安装注意事项

　　Matters needing attention in construction and installation

　　采用钢筋或模板对止水带进行定位。施工缝间隙止水带一般一半先浇注于砼土中,另一半在二期施工中埋入砼内。因此,止水带的固定方法必须可靠,避免发生移位。二期施工前,另一半止水带应注意保护。在浇注过程中应注意捣浇压力和方法,以避免砼中的尖角石头和锐利的钢筋刺破止水带。

　　Fixing the water stop belt with steel bar or template. Half of the gap in the construction gap is first poured in the concrete soil, and the other half is embedded in the concrete in the two stage construction. Therefore, the fixing method of the water stop belt must be reliable and avoid displacement. Before the two phase construction, the other half of the water stop belt should pay attention to protection. The pouring pressure and method should be paid attention to during the pouring process so as to avoid the sharp stone and sharp steel bar in the concrete to pierce the water stop.

　　注:本产品不得露天长期存放,不得与油漆等污染性强的化学物接触。雨天温度宜施工,施工温度宜在15-35℃之间。

　　Note: This product shall not be stored for a long time in the open air and shall not be exposed to chemical contamination such as paint. Rainy temperature should be construction, construction temperature should be between 15-35 degrees.

　　应用范围

　　Application range

　　GB型钢板丁基腻子止水带隧道、地铁、堤坝、涵洞、水利水电工程中施工缝、高层建筑地下室、地下停车场等主要工程施工缝。

　　GB type steel plate, butyl putty, waterproof belt tunnel, subway, dam, culvert, water conservancy and hydropower project construction joints, high-rise building basement, underground parking lot and other major construction joints.