超高分子量聚乙烯吸水箱面板具有质经、厚度均匀、表面光滑平整、耐热件好、优良的化学路定性和电绝缘性、无毒等特征，密度小，易焊接和加工，具有优越的耐化性，耐热性及耐冲击性是目前符合环保要求之工程塑料之一。

　　高分子聚乙烯吸水箱面板UPE盖板PE刮板性能介绍:

　　一、UPE吸水箱盖板PE刮板使用温度100～110℃。耐寒性好，可在-269℃下使用。密度0.985g/cm3，分子量200万的产品，其断裂拉伸强度40MPa，断裂伸长率350％，弯曲弹性模量600MPa，悬臂梁缺口冲击冲不断。磨耗量(MPC法)20mm。

　　二、高分子聚乙烯吸水箱面板UPE盖板PE刮板在我们平时的工作当中常见的吸水面板有真空式吸水面板、涂层真空面板、聚乙烯面板等。其中聚乙烯吸水箱面板具有生理循环性和生理适应性，本身无腐蚀性；真空式吸水面板具有机械强度高、摩擦系数小、脱水均匀等特性，还可以极大提高面板和案网的使用寿命。

　　The panel of UHMWPE water absorption tank has the characteristics of high quality, uniform thickness, smooth and flat surface, good heat-resistant parts, excellent chemical route, electrical insulation, non-toxic, low density, easy welding and processing, excellent chemical resistance, heat resistance and impact resistance. It is one of the engineering plastics currently meeting the environmental protection requirements.

　　Performance introduction of PE scraper for UPE cover plate of polymer polyethylene water absorption tank panel:

　　1、 The service temperature of PE scraper of UPE suction tank cover plate is 100 ~ 110 ℃. It has good cold resistance and can be used at - 269 ℃. The product with a density of 0.985g/cm3 and a molecular weight of 2 million has a breaking tensile strength of 40MPa, an elongation at break of 350%, a bending elastic modulus of 600MPa, and a continuous impact impact impact of the cantilever notch. Abrasion amount (MPC Method) 20mm.

　　2、 Polymer polyethylene water absorption tank panel UPE cover plate PE scraper in our daily work, the common water absorption panels include vacuum type water absorption panel, coating vacuum panel, polyethylene panel, etc. Among them, the polyethylene water absorption tank panel has physiological circulation and physiological adaptability, and is non corrosive; The vacuum type water absorbing panel has the characteristics of high mechanical strength, small friction coefficient, uniform dehydration, etc., and can greatly improve the service life of the panel and the case net.