安捷伦7890用带反吹的甲烷转化炉测乙烯中CO

名称:安捷伦7890用带反吹的甲烷转化炉测乙烯中CO

供应商:浩瀚色谱(山东)应用技术开发有限公司

价格:面议

最小起订量:1/台

地址:山东滕州市(商务部和技术部)

手机:13963221227

联系人:王经理 (请说在中科商务网上看到)

产品编号:212114276

更新时间:2024-09-11

发布者IP:112.248.170.13

详细说明

  工业用乙烯、丙烯中微量一氧化碳和二氧化碳的测定 气相色谱法

  本标准规定了工业用乙烯、丙烯中微量一氧化碳、二氧化碳含量测定的气相色谱法。本标准适用于乙烯、丙烯中浓度大于1 mL/m3一氧化碳、浓度大于5 mL/m3二氧化碳的测定。

  浩瀚色谱(山东)应用技术开发有限公司,采用带转化炉的氢火焰气相色谱与色谱工作站,通过选择合适的操作条件及标准气体样品,对工业用乙烯、丙烯中痕量的一氧化碳、二氧化碳进行检测,方法的检出限达到μL/m3级水平。对方法的回收率及精密度作试验,测定回收率为97.1%—103.9%,相对标准偏差(n=6)为2.67%~7.40%。

  名称:便携式甲烷转化炉

  型号:HH-CH4-GC

  适合于:安捷伦4890. 5890, 6890, 7890, 7820, 8860, 8890气相色谱仪上;岛津2010,2014,2030

  HH-CH4-GC甲烷转化炉的转化效率高,安装简单,便携式,小巧玲珑,集成加热,气路,进样,温控,柱分离系统于一体;可扩展为二维/多维,反吹,切割系统。

  Determination of trace amounts of carbon monoxide and carbon dioxide in industrial ethylene and propylene by gas chromatography

  This standard specifies the gas chromatography method for the determination of trace amounts of carbon monoxide and carbon dioxide in industrial ethylene and propylene. This standard is applicable to the determination of carbon monoxide with a concentration greater than 1 mL/m3 and carbon dioxide with a concentration greater than 5 mL/m3 in ethylene and propylene.

  Haohan Chromatography (Shandong) Application Technology Development Co., Ltd. uses a hydrogen flame gas chromatography and chromatography workstation with a conversion furnace to detect trace amounts of carbon monoxide and carbon dioxide in industrial ethylene and propylene by selecting appropriate operating conditions and standard gas samples. The detection limit of the method reaches μ Level of L/m3. The recovery rate and precision of the method were tested, and the recovery rate was determined to be 97.1% -103.9%, with a relative standard deviation (n=6) of 2.67% -7.40%.

  Name: Portable methane conversion furnace

  Model: HH-CH4-GC

  Suitable for: Agilent 4890, 5890, 6890, 7890, 7820, 8860, 8890 gas chromatographs; Shimadzu 201020142030

  The HH-CH4-GC methane conversion furnace has high conversion efficiency, simple installation, portability, and is small and exquisite. It integrates heating, gas path, injection, temperature control, and column separation systems; Can be extended to 2D/multi-dimensional, blow back, cutting systems.