济南笨鸟先飞
1、水泥砂浆面层与基层应粘结牢固，不应空鼓,
1, the cement mortar surface layer and base layer should be bonded firmly, should not be empty,
2、水泥砂浆面层表面应密实压光，不允许有裂缝，脱皮、起沙、接荐不平等缺陷。
2, cement mortar layer surface should be dense and light pressure, are not allowed to crack, peeling, sand, then recommended inequality defects.
3、不泛水的地面，应按设计要求做好泛水，不得有倒泛水现象。
3, the ground should be flashing, flashing according to design requirements, not pour flashing phenomenon.
4、用2m靠尺检查表面平整度，允许偏差4mm。
4, with 2m by the ruler to check the surface roughness, allow deviation 4mm.
5.两米内误差小于3毫米(最大不可超过5毫米)
5 two meters error is less than 3 mm (maximum of not more than 5 mm)
6.地面无起沙、起空、脱落现象
6 the ground does not have sand, empty, shedding phenomenon
7.地面施工后无异味
7 no odor after the construction of the ground
8.地面色泽匀净、无反常色彩
8, no abnormal color uniform ground color
9.地面无裂缝(原始地面翻砂严重会出现少量细微裂纹，但不可影响平整度)
9 the ground cracks (the original foundry ground there will be a small amount of fine cracks seriously, but can not affect the flatness)
不泛水的地面，应按设计要求做好泛水，不得有倒泛水现象；
No flashing ground should be flashing according to design requirements, not pour flashing phenomenon;
用2m靠尺检查表面平整度，允许偏差4mm；
Using 2m to check the surface roughness by the ruler, the allowable deviation 4mm;
水泥砂浆面层与基层应粘结牢固,不应空鼓；
The cement mortar surface layer and the base layer should be bonded firmly, should not be empty;
水泥砂浆面层表面应密实压光，不允许有裂缝，脱皮、起沙、接荐不平等缺陷。
The cement mortar layer surface should be dense and light pressure, are not allowed to crack, peeling, sand, then recommended inequality defects.
其实很简单，水泥砂浆地面找平验收标准只有四条，就这么简单的方法就可以检查出问题，并加以解决，不让问题影响之后的家居装修施工项目。
Is actually very simple, the acceptance standard of cement mortar ground leveling method is only four, so simple you can check out the problem, and to solve the problem, not to influence the Home Furnishing decoration construction project.
济南自流平，地面找平服务谁都可以做，但是真正用心做的没有几个。腾师傅郑重承诺:仔细，服务，质量决对不含有一丝的杂质！用我的实际行动，做出你满意的效果。
我们的宗旨是质量认证，诚信为本。以质量得人心，以服务赢客户，客户满意是我们的目标，欢迎广大新老朋友前来咨询。
诺商基于多年的优化经验和品牌基础推出的诺商商道系统，诺商信息您身边的互联网专家！