详细说明
DuPont™ Delrin® 数据
杜邦™塑钢®
acetal resin
缩醛树脂
Food Contact Resins
食品接触树脂
Delrin® FG400XRD NC010 is a filled, medium viscosity acetal copolymer for injection molding. It is detected in x-ray detectors. It has been developed for consideration into applications such as parts for the food industry.
塑钢®fg400xrd nc010是一个填充，中等粘度缩醛共聚物注射成型。它是在X-射线探测器检测。它已制定考虑到应用等食品工业的零件。
| Property | Test Method | Units | Value |
| MechanicalYield StressYield StrainTensile ModulusNotched Charpy Impact StrengthUnnotched Charpy Impact Strength | ISO 527ISO 527ISO 527ISO 179/1eAISO 179/1eU | MPa (kpsi)%MPa (kpsi)2kJ/m2kJ/m | 51 (7.4)73200 (464)480 |
| ThermalMelting Temperature10°C/min | ISO 11357-1/-3 | °C (°F) | 168 (335) |
| Processing - Injection MoldingMelt Temperature RangeMelt Temperature OptimumMold Temperature RangeMold Temperature OptimumDrying Time, Dehumidified DryerDrying TemperatureProcessing Moisture ContentHold Pressure Range | | °C (°F)°C (°F)°C (°F)°C (°F)h°C (°F)%MPa (kpsi) | 200-210 (390-410)205 (400)80-100 (175-210)90 (195)2-480 (175)80-100 (12-15) |
Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm.
Test temperatures are 23°C unless otherwise stated.
The above data are preliminary and are subject to change as additional data are developed on subsequent lots.
The DuPont Oval Logo, DuPont™, The miracles of science™ and Delrin® are trademarks or registered trademarks of DuPont Company. Copyright© 2010