详细说明
产品描述（超薄喇叭）
产品名称:FDS-2515058R8W1.0
尺寸:25mm
额定功率:1.0 W
最大功率:1W
阻抗:8±15% Ω
重量:3.2 g ± 0.2g
共振频率:600Hz
灵敏度/声压:92± 3dB
DESCRIPTION
福鼎 FDS-2515058R8W1.0 扬声器超薄喇叭 厂家直销 常州
描述
| 01 | Type | Dynamic speaker |
| 02 | Dimension | External diameter2515mm |
| 03 | Rated Input Power | 1.0W |
| 04 | Impedance | 8ohm±15% at1KHz |
| 05 | Resonance Frequency (Fo) | 600Hz±20% at Fo, 1V |
| 06 | Sensitivity (S.P.L.) | 92dB(1W/1m)±3 dB | at AVE0.4K,0.6K,0.8K 1.0K(Hz). |
| 07 | Frequency Range | Fo–20KHz |
| 08 | Distortion | Less than 10 % at 2000Hz2.0W |
| 09 | Max. Input Power | Must be normal at1.5W white noise for 1 minute. |
| 10 | Voice Coil | Diameter8.7mm |
| 11 | Magnet | Rare earth permanent (Nd-Fe-B) magnetΦ8.0 x 2.0mm |
| 12 | Weight | 3.2g±0.2g |
| 13 | Appearance | Should not exist any obstacle to be harmful to normal operation; damages, cracks, rusts and distortions, etc. |
| 14 | Operation Test | Must be normal at program source1.0W |
| 15 | Buzz, Rattle, etc. | Should not be audible at2.83Vsine Wave between Fo to20KHz |
| 16 | Polarity | When positive voltage is applied to the terminal marked (+), diaphragm should move to the front. |
| 17 | Terminal Strength | Capable of withstand 1kg load for 30 seconds without resulting in any damage or rejection. |
| 18 | Load Test | 1.0W white noise is applied for 96 hours and satisfy the test listed on item 05,06,13,15 |
| 19 | High Temp. Test | Keep 96 hours at +70℃±3℃and leave 3 hours in normal temperature and then check |
| 20 | Low Temp. Test | Keep 96 hours at -20℃±3℃and leave 3 hours in normal temperature and then check |
| 21 | Humidity Test | Keep 96 hours at + 60℃±3℃relative humidity 95% and leave 3 hours in normal temperature and then checked. |
| 22 | Drop Test | Drop the speakers contained in normal box onto the board 20mm thick 10 times from the height of 0.75m and then should satisfy the test listed on item 13 and 15 |
P 3/4
| Measurement Condition |
| Test and measurement will be carried out under normal condition of temperaturewithin 5℃to 35℃,relative humidity within 45% to 85% and air pressure of 860mbar to 1060mbar.Should uncertainly arise in data obtained from the above atmosphere, control of temperatureAt 20℃±2℃ and relative humidity within 60% and 70%, with air pressure remaining unchanged, To be enforced.1.Microphone : B&K 41912.Standard Baffle :In IEC 268-5 Where 1350mm x 1650mm3.Testing Distance : 0.1m4.Zero Level : -dB5.Mode : SPEAKER6.Input Power :1.0W7.potentiometer Range : 50dB8.Sweep Time : 0.5sec |
| Frequency Response Curve |
|