C160电流钳

名称:C160电流钳

供应商:佛山市擎伟机电设备有限公司

价格:面议

最小起订量:1/件

地址:市南海区桂城南新二路20号

手机:13928661314

联系人:林伟全 (请说在中科商务网上看到)

产品编号:147814264

更新时间:2019-10-25

发布者IP:

详细说明

  Current Range : 0.1 A…30 A peak1 A…300 A peak1 A…2000 A peakSignal de sortie : 100 mV AC/A AC (1 V to 10A)10 mV AC/A AC (1 V to 100A)1 mV AC/A AC (1 V to 1000A)Frequency range : 10 Hz…100kHz(-3dB)dl/dt max. : 10 A/µsCurrents maxima : 1000 A continuous for a frequency ≦ 1kHz

  (limitation proportional to the  opposite of frequency beyond)1200 A for 40 min max.  

  ( pause between measurement > 20 min)Load impedance : ≧1MΩ and ≦ 47 pFOutput impedance 1kHz : 515Ω ± 10%Accuracy and phase shift : Range 10 A :

Primary current0.1…0.5A0.1…2A2…10A10…12A
Accuracy in % of output signal≦ 3% + 10 mV≦ 3% + 10 mV≦ 3% + 10 mV≦ 3% + 10 mV
Phase shiftnot specifiednot specified≦ 15∘≦ 15∘

  Range 100A :

Primary current0.1…0.5A5…20A20…100A100…120A
Accuracy in % of output signal≦ 2% + 5 mV≦ 2% + 5 mV≦ 2% + 5 mV≦ 2% + 5 mV
Phase shiftnot specified≦ 15∘≦ 10∘≦ 5∘

  Range 1000A :

Primary current1…50A50…200A200…1000A1000…1200A
Accuracy in % of output signal≦ 1% + 1mV≦ 1% + 1mV≦ 1% + 1 mV≦ 1% + 1 mV
Phase shiftnot specified≦ 3∘≦ 2∘≦ 1∘

  Insertion impedance (at 50/60 Hz) : Range 10 A: < 10 mΩRange 100 A: < 10 mΩRange 1000 A: < 100 mΩAmpere product x second : 1 A.sRising time/ Falling down time : ≦ 40 µsWorking voltage : 600 V rmsCommon mode voltage : 600 V for category III and pollution level 2Adjacent conductor influence : ≦ 1mA to 50 HzInfluence of conductor influence in the jaws : ≦ 0.1% of output signal for frequencies ≦ 400 HzFrequency influence : Range 10 A< 10% of output signal 10 Hz…1 kHz< 5% of output signal 1 kHz…10 kHz< 20% of output signal 10 kHz.....50 kHz< 3 dB 50 kHz…100 kHzRange 100 A< 5% of output signal 10 Hz…1 kHz< 3% of output signal 1 kHz…10 kHz< 20% of output signal 10 kHz…50 kHz< 3 dB 50 kHz…100 kHzRange 1000 A]< 1% of output signal 10 Hz…1 kHz < 2% of output signal 1 kHz…10 kHz < 10% of output signal 10 kHz…50 kHz < 3 dB 50 kHz…100 kHz Influence of crest factor : <1 % of output signal for a crest factor ≦ 6 with current Range 10 A: ≦ 30 A peak(5 A rms) Range 100 A: ≦ 300 A peak(50 A rms) Range 1000 A: ≦ 2000 A peak(500 A rms) Influence of DC current

  superposed  to nominal current : <1 % of output signal for a current≦ 30A DC ​