您的位置:供应信息分类 > 安防 > 锁具 > 指纹锁
Capacitive fingerprint module

名称:Capacitive fingerprint module

供应商:北京艾迪沃德科技发展有限公司

价格:面议

最小起订量:0/

地址:北京市海淀区金源时代商务中心A座10A

手机:13718395695

联系人:秦 (请说在中科商务网上看到)

产品编号:77403395

更新时间:2024-04-25

发布者IP:123.119.41.114

详细说明

  Capacitive fingerprint module independently by Eddie ward based fingerprint chip QS808 fingerprint module + Sweden fpc1011 capacitive fingerprint sensor.The module adopts the Swedish FPC capacitive fingerprint sensor chip, "living" fingerprint detection, dry wet fingers strong adaptation, high image resolution, no distortion, image quality is good.Semiconductor acquisition chip, small volume, low power consumption, high safety, offers a variety of integrated support for high-end customers applications.QS808 fingerprint chip based on ARM kernel architecture (M3, stable operation, with low power design.Run the study fingerprint algorithm: automatically to adapt to changes in the fingerprint, 360 ° recognition.USB, UART, SPI interface, easy to develop.

  Capacitive fingerprint module parameters:

projectparameter
The processor (CPU)Core: 32-bit ARM Cotex-M3,108MHz,RAM:96KB,Flash memory:1MB
Fingerprint readersFPC1011
Fingerprint capacityOptional 1700/2000/3000.The default is 1700
Deterrent rate (FAR)< 0.001 %(Security Level:3 )
False reject rate (FRR)< 0.1 %(Security Level:3 )
The comparison model1: N recognition / 1:1 verification
The fingerprint template data size498 bytes (Byte)
Security levelFrom 1 to 5 can be set, the default: 3
The response timeFingerprint preprocessing < 0.45 s
1: N recognition time registered full capacity (3000) < 1.5 s
Communication interfaceUsb or UART (3.3 V TTL logic)
A serial port communication parametersStart bit: 1, stop bit: 1, parity: no, support baud rate as follows:9600/19200/38400/57600/38400/57600/38400/57600The factory value is: 115200
The power supplyThe input voltage: DC3.3 V to 6 VDynamic current work: less than 40 maDormancy: the static current is less than 20 ua
The work environmentTemperature: - 10 ℃ to 60 ℃Humidity: 20% - 80%
Supported by the operating systemWindows or Android

  Capacitive fingerprint module currently has been widely used in: access control attendance, locks, safes, mobile phone, KEY, U disk...