钢厂用BKPT1防爆两级跑偏开关制造厂家低价、BKPT1防爆跑偏开关、输送带两级跑偏开关、跑偏传感器

　　BKPT1防爆两级跑偏开关侧面滚轮的倾斜角度:最大75° 侧面滚轮的操作扭力3.4~5.4Nm 接点容量15A-125，250VAC 1/2A。输送机BKPT1防爆两级跑偏开关是分两个位置检测输送机皮带的跑偏程度，根据皮带的跑偏程度输出报警或停止信号的一种开关。使用此开关可防止昂贵的输送皮带受损坏以及因事故引起输送系统的混乱。两级跑偏开关在安全运行输送系统里是不可缺少的，因此广泛用于钢铁厂，水泥厂，化工厂，火力发电厂等等

　　BKPT1防爆两级跑偏开关特点:1、室外用IP67 2、使用高性能的微动开关和无需加油的滚珠轴承，侧面滚轮最大可倾斜到75度，在输送机发生异常偏离时，开关也会准确动作，其使用寿命也非常长

　　3、接点动作时，侧面滚轮不转动2度以上就不可恢复（滞后现象的特性），因此开关动作时的接点关闭不会重复。所以用简单的控制电路可保护皮带是输送机

　　BKPT1防爆两级跑偏开关规格参数:

　　侧面滚轮的倾斜角度:最大75° 侧面滚轮的操作扭力3.4~5.4Nm 接点容量15A-125，250VAC 1/2A

　　安装方法说明:

　　针对三槽式的皮带输送机，20度的输送槽角，600mm宽的皮带为参考。关于更宽的皮带输送机安装。

　　BKPT1防爆两级跑偏开关动作说明:Company name: Shandong Zhenhong Explosion-proof Electrical Equipment Co., Ltd.

　　Contact person: Song Shimin

　　Mobile phone number: 1--5--0--5--4--8--5--3--0--5--1

　　Address: Rencheng District Industrial Park, Jining City, Shandong Province

　　示意图中的角度为侧面滚轮的倾斜角度，接点1,2倾斜到20度时闭合恢复到18度时断开，接点4，5倾斜到35度时断开，恢复到33度时闭合，接点（限位开关）动作位置根据调整凸轮可变更

　　The inclination angle of the side rollers of the BKPT1 explosion-proof two-stage deviation switch: maximum 75°. The operating torque of the side rollers is 3.4~5.4Nm. The contact capacity is 15A-125, 250VAC 1/2A. The conveyor BKPT1 explosion-proof two-stage deviation switch is a switch that detects the deviation degree of the conveyor belt in two positions, and outputs an alarm or stop signal according to the deviation degree of the belt. Using this switch can prevent expensive conveyor belts from being damaged and the conveyor system from being messed up due to accidents. The two-stage deviation switch is indispensable in the safe operation of the conveying system, so it is widely used in steel plants, cement plants, chemical plants, thermal power plants, etc.

　　BKPT1 explosion-proof two-stage deviation switch features: 1, outdoor use IP67 2, Using high-performance micro switches and ball bearings that do not need to be refueled, the side rollers can be tilted up to 75 degrees. When the conveyor is abnormally deviated, the switch will operate accurately, and its service life is also very long.

　　3. When the contact is activated, the side The roller cannot be restored without turning more than 2 degrees (the characteristic of hysteresis), so the contact closure during the switch operation will not be repeated. Therefore, a simple control circuit can protect the belt. Conveyor

　　BKPT1 explosion-proof two-stage deviation switch Specification parameters:

　　Inclination angle of side rollers: maximum 75° Operating torque of side rollers 3.4~5.4Nm Contact capacity 15A-125, 250VAC 1/2A

　　Installation method description: For

　　the three-slot belt conveyor, the angle of the conveyor groove is 20 degrees, and the belt with a width of 600mm is used as a reference. Regarding the installation of a wider belt conveyor.

　　BKPT1 explosion-proof two-stage deviation switch action description:

　　the angle in the schematic diagram is the inclination angle of the side rollers, when contact 1, 2 is inclined to 20 degrees, it is closed when it returns to 18 degrees, and it is disconnected, and contacts 4, 5 are opened when it is inclined to 35 degrees. , Closed when it returns to 33 degrees, the contact (limit switch) action position can be changed according to the adjustment cam