详细说明
外形尺寸 Figure And Size
外形封装尺寸及 材料 Package Dimensions And Materials
| 芯片 Chip | 胶体颜色 |
| | | Lens Color |
原料 | | 发光颜色 |
Material | | Emitting Color | |
| 水透明 |
| | |
| | 白色 |
InGaN | | Water Clear |
| White |
| | |
Notes:
1.All dimension units are millimeters
2.All dimension tolerance is ±0.1 mm unless otherwise noted
3.An epoxy meniscus may extend about 1.5mm Down the leads
4.Burr around bottom of epoxy may be 0.5mm Max.
特性参数 Characteristics Parameter at Ta=25°C Tj≤80°C If=20mA
产品型号 | | 发光颜色 | | X、Y | | 胶体颜色 | 正向电压 | 光强 | | | | 发光角度 |
| | | Forward | Luminous | | Viewing Angle |
Part Number | | Emitting Color | | | Lens Type | |
| | | | Voltage Vf(V) | intensity (mcd) | | | (°) |
| | | | | | | | |
| | | | | | | | | | | | | | |
5W4HCA-H | | 白色 | | X:0.25—0.30 | | 水透明 | 3.0—3.8 | 10000—18000 | | | 15±5 |
| White | | Y:0.25—0.30 | | Water Clear | | |
| | | | | | | | | | | |
| | | | | | | | | | | | |
极限参数 Absolute Maximum Ratings at Ta=25°C | | | | | | | | | |
| | | | | | | | | | |
特性 Characteristic | | | | | | | 符号 Symbol | | 最大 MAX | 单位 Unit |
| | | | | | | | | | | |
消耗功率 Power Dissipation | | | | | | PD | | 76 | | | mW |
| | | | | | | | | |
正向脉冲峰值电流 Peak Forward Current | | | | IFP | | 100 | | | mA |
(1/10 Duty Cycle 0.1ms Pulse Width) | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
反向电压 Reverse Voltage | | | | | | VR | | 5 | | | V |
| | | | | | | | | | | |
反向电流 Reverse Current | | | | | | IR | | 5 | | | μA |
| | | | | | | | | | |
工作环境温度 Operating Temperature | | | | | | Topr | | -40—80 | | |
| | | | | | | | | | | | | | ℃ |
储存温度 Storage Temperature | | | | | | Tspr | | -40—100 |
| | | | | | |
| | | | | | | |
焊接温度 Lead Soldering Temperature(5mm From Body) | | | | Tsol | | 260(≤5s) | ℃ |
| | | | | | | | | | | | | | |
备注 NOTES:
1. 所有尺寸单位为毫米;All dimensions are millimeters;
2. 除特殊标明外,其它尺寸公差为±0.1mm .Tolerances are ±0.1mm unless otherwise specified.
3. 在符合特性参数条件下使用,LED 寿命不低于 20000 小时.Under the stipulated Characteristics parameters above, the life span of the LED is more than 20,000 hours.
4. 本规格书数据仅供参考,实际数据以产品承认书为准. The data on this specification is for reference only and the actual data is in accordance with the acknowledgment.
5. 以上测试数据均来自本公司测试条件.The above data are from our company’s testing condition.