Automatic Hydraulic Mould Carrier

　　l 型号:HC-M2000/14型

　　Type: HC-M2000/14

　　l 数量:1台

　　QTY: 1 sets

　　l 电器控系统: 1套

　　Electric control system: 1 sets

　　l 设备技术参数明细/technique parameters list

　　模板锁紧面尺寸 2100mm*1400mm

　　Plate size 2100mm*1400mm

　　闭合高度 300-900mm 可调

　　Height of Closing 300-900mm adjustable

　　开模角度 0-60°

　　Upper plate tilting to open 0-60°

　　锁模力 200kn

　　Closing force 200KN

　　开模力 70kn

　　Opening force 70KN

　　下模板行程 200mm

　　Lower plate stroke 200mm

　　开、闭模时间 12s

　　Complete opening/closing time 12s

　　模具固定栓 DIN 650-18H12-(16)

　　Tools fixation slots DIN 650-18H12-(16)

　　模具温度 50°-80°

　　Mould temperature 50°-80°

　　控制电压 DC24V

　　Control power DC24V

　　l 生产流程说明:

　　Producing process:

　　- 液压系统固定在地面上，驱动1台模架开闭动作

　　Hydraulic system is fixed on the floor, which is used to drive mould carrier opening and closing.

　　- 锁模流程:整理模具-喷脱模剂-安全钩脱钩-合模-锁模缸启动锁模-液压缸顶出模架-闭模灌注-熟化-开模

　　Mould locking process: clean mould-spray release agent-safety hook release-close mould-cylinder start-closing inject-curing-open

　　l 灌注方式:闭模式灌注

　　Injection way: closing injection

　　l 控制操作系统:一套

　　Control system: 1 set

　　采用西门子公司PLC中央控制，OP操作系统具有强大的功能菜单，显示压力、时间、温控、生产参数设定、安全监控、警示等。

　　PLC adopts Germany SIMENS; touch screen has powerful menu function, which can display the pressure, time, temperature control, producing parameters, safety monitoring, alarm and so on.

　　l 模具加温设备:1台

　　Heating equipment: 1 set

　　- 功率12KW*1台通过水循环分别给2套液压模具加温及温度控制

　　1 set of 12 kw cycle water to heat the mould and control the temperature.

　　- 可分别实行独立温控

　　Control the temperature separately.

　　l 设备安全保护系统:

　　Safety system:

　　- 整套模架升降开闭由液压系统自动完成

　　The mould carrier’s lift, opening and closing are finished by hydraulic system.

　　- 模架配有防脱落机械保险装置

　　Anti fall mechanical safety device.

　　- 模具两侧装有红外线光栅安全感应器

　　There are red-ray barrier sensors on the both 2 sides of the mould carrier.

　　- 设备设有急停及安全自动警示装置

　　Emergency stop and alarm system

　　- 设备配有防护栏

　　The equipment has light barriers.