电源测试系统ATC1500-QRX

名称:电源测试系统ATC1500-QRX

供应商:深圳新能基科技有限公司苏州分公司

价格:面议

最小起订量:1/台

地址:江苏省苏州市吴中区高新区珠江路100号

手机:15051408990

联系人:朱阿敏 (请说在中科商务网上看到)

产品编号:62142540

更新时间:2021-02-05

发布者IP:58.208.18.53

详细说明

  ATC1500-QRX-2

  适用:适用于充电器,电源适配器,移动电源,LED驱动电源的在线测试!

  ATC1500-QRX适用于电源厂生产线测试使用。

  机柜型测试,测试速度快,同时可迅速形成测试报表,有效的提高了工厂的品质控制能力。

  特点: 1.测试速度快,精度高!

  2.充电器、适配器、移动电源测试.

  3.待机功率可最小测至3mW左右.

  4.性价比高.

  5.自动生成Excel(内含生产数量,不良率,柏拉图,CPK值.)

  6.可测试平均效率,I-V曲线.

  7.具有LED负载模式,可测试LED驱动电源

  二、配置清单:

配件明细ATC150主机X4内含4路电子负载(0-60V/0-15A/150w)/4路功率计/4路示波器模块品牌:STS
四通道测试架X1左右智能转换品牌:STS
工业电脑X1研为工控品牌:研为
显示器X1BENQ品牌:明基
ID电压测试盒4路ID电压品牌:STS
配套线材X1配套连接一品牌:STS
AC变频电源0-300V/1000VA品牌:STS
软件X1STS自主研发品牌:STS
机柜X119"标准机柜1.7米高.品牌:怡丰

  .因为STS的仪器为高度集成式设计,所有模块均集成在一个主机内,该主机即为ATC150.该主机内置了以上1-5项的模块.以上产品除工业电脑外,其它所有模块均由STS自行生产.

  STS的产品为 美国设计,中国制造.

  售后服务: 所有产品自销售之日起一年内免费维修,终身维护.

  三、主要功能特点:

  1.可以测试充电器,适配器,移动电源,LED驱动电源等.四通道同时测试,提高生产效率。为客户节约2-3名人工。

  2.图形界面基于Windows XP环境

  3.测试程序编辑存储功能

  4.测试项目选择功能(输入/输出/空载/短路

  欠压/稳压/过载/纹波/效率等功能)

  5.统计测试报告(Excel电子档)

  6.自动生成CPK等品质报表

  7.配置灵活

  8.性价比高,适合大中小企业。

  9.测试速度快

  10.测试不良结果实时打印功能(需外接打印机)

  四、测试项目

Test NameParameter and RangeAccuracy
START UP启动Inrush current: 0 – 83ApkStartup time: 0 to 32767msec.Output voltage overshoot: 0 – 60VpkRise time :0-32767msec±1% (reading + range)±1ms±1% (reading + range)±1ms
UVLO欠压Functional test only, Pass/FailN/A
IDLE待机Standby input power: 0 –5/25/250/1250WStandby input current: 0 – 0.1/0.5/5/25ApkInput voltage: 30 – 280V*Note 2±0.1% (reading + range)±0.1% (reading + range)±0.1% (reading + range)
STANDARD CV(Constant Current and Constant Resistance load) 恒压CC Mode: 0 – 3/15 ACR Mode: 0.1 – 50OhmInput Voltage: 30 – 300Vrms *Note 1Input Current: 0 – 0.1/0.5/5/25Apk Input Power: 0 –5/25/250/1250WPower Factor 0 – 1.0 Output Voltage 0 – 15/60VdcOutput Current 0 – 3/15AdcEfficiency: 0 – 100%Ripple/Noise 200kHz: 0 – 500mVRipple/Noise 20MHz: 0 – 500mVID Voltage:0-60v±0.15% (setting + range)±0.3% (setting + range) *Note 2±0.1% (reading + range)±0.1% (reading + range)±0.1% (reading + range)±0.2% (reading + range)±0.05% (reading + range)±0.1% (reading + range)±0.25% (reading + range)±2% (reading + 5mV)±2% (reading + 5mV)±0.1% (reading + range)
STANDARD CC(Constant Voltage and Constant Resistance load)恒流CV Mode: 0 – 15/60VCR Mode: 0.1 – 50OhmInput voltage: 30 – 300Vrms *Note 1Input Current: 0 – 0.1/0.5/5/25Apk Input Power: 0 –5/25/250/1250WPower Factor 0 – 1.0 Output Voltage 0 – 15/60VdcOutput Current 0 – 15AdcEfficiency: 0 – 100%±0.15% (setting + range)±0.3% (setting + range) *Note 3±0.1% (reading + range)±0.1% (reading + range)±0.1% (reading + range)±0.2% (reading + range)±0.05% (reading + range)±0.1% (reading + range)±0.25% (reading + range)
LED Driver Test (LED Load)LED负载Input voltage: 30 – 300 Vrms *Note 1Input Current: 0 – 5/25Apk Input Power: 0 – 250/1250WPower Factor 0 – 1.0 Output Average Current reading: 0 – 15AdcOutput Average Voltage reading: 0 – 60VdcOutput pulsed current reading (TRIAC, PWM)±0.1% (reading + range)±0.1% (reading + range)±0.1% (reading + range)±0.2% (reading + range)±0.1% (reading + range) *Note 4±0.05% (reading + range) *Note 4±0.5% (reading + range)
SHORT CIRCUIT短路Input voltage: 30 – 300 Vrms *Note 1Input Current: 0 – 5/25Apk Input Power: 0 – 250/1250WPower Factor 0 – 1.0 Output Average Current: 0 – 15Adc±0.1% (reading + range)±0.1% (reading + range)±0.1% (reading + range)±0.2% (reading + range)±0.2% (reading + range) *Note 4
OVER CURRENT过流Current trip point: 0 – 3/15AdcTrip point voltage: 0 – 15/60VdcWait Time >= 10msec.Wait Time < 10msec.Voltage Before Trip Point: 0 – 15/60VdcCurrent Before Trip Point: 0 – 3/15Adc±0.1% (reading + range) ±0.05% (reading + range)±0.1% (reading + range)±0.1% (reading + range)±0.1% (reading + range)
OVER VOLTAGE过压OV trip point: 0 – 60V±0.1% (reading + range)
LINE REGULATION线性调整Voltage regulation: 0 – 100%±0.1% (reading + range)
LOAD REGULATION负载调整Voltage regulation: 0 – 100%±0.1% (reading + range)
AVERAGE EFFICIENCY 平均效率Efficiency: 0 – 100%±0.25% (reading + range)
I-V CURVE PLOT I-V曲线CC Mode: 0 – 3/15 ACC Mode Output Voltage 0 – 15/60VdcCC Mode Output Current 0 – 3/15AdcCV Mode: 0 – 15/60VCV Mode Output Voltage 0 – 15/60VdcCV Mode Output Current 0 – 15Adc±0.15% (setting + range)±0.05% (reading + range)±0.1% (reading + range)±0.15% (setting + range)±0.05% (reading + range)±0.1% (reading + range)
POWER DOWN关机Holdup time: 0 – 65535 msec.Input voltage: 30 – 300Vrms *Note 1Output Current 0 – 3/15AdcOutput voltage overshoot: 0 – 60Vpk±1ms±0.1% (reading + range)±0.1% (reading + range)±1% (reading + range)
Global Setting总体设定Load On Voltage: 0 – 60VdcWait Time: 0 – 32767msec.Nominal Output Voltage: 0 – 60VdcNominal Output Current: 0 – 15Adc±1% (reading + range)±1ms±1% (reading + range)±1% (reading + range)
Optional Setting可选项设定Bias Output Voltage: 0 – 28VdcRelay State rated current:3A±0.2% (reading + range)-