Features: high strength oil resistant

　　Use: single component anaerobic retaining adhesives, and in

　　Under the condition of air isolation, this product is in the two

　　Rapid solidification between two metal surfaces

　　Typical use: used for bonding cylindrical mating parts.

　　It is suitable for applications requiring low viscosity.

　　Viscosity: 100/150

　　Cure time: 30 minutes /24 hours

　　Shear strength: 3770

　　Relative density: 1.1

　　instructions:

　　1 surface treatment: derusting, degreasing, cleaning and drying

　　Rust can be mechanical or chemical methods: degreasing, cleaning and using appropriate organic solvent (such as acetone solution

　　For two to three times to soak in.

　　2 apply anaerobic adhesive: apply adequate amount of anaerobic adhesive to fill the gap.

　　3 assembly: should be positioned as soon as possible, after positioning can not move the workpiece

　　4 curing: general 1 hours anaerobic adhesive can achieve the use of strength, 24 hours to reach the maximum strength.