Properties: high strength and high temperature resistance

　　Application: applied to continuous working temperature up to 175oC

　　The occasion to fill the gap to 0.15mm in the following 5 points

　　Clock Neichu curing

　　Viscosity: 400/600

　　Cure time: 5 minutes /24 hours

　　Shear strength: 3625

　　Relative density: 1.13

　　instructions:

　　1 surface treatment: derusting, degreasing, cleaning and drying

　　Rust can be mechanical or chemical methods: degreasing, cleaning and using appropriate organic solvent (such as acetone solution

　　For two to three times to soak in.

　　2 apply anaerobic adhesive: apply adequate amount of anaerobic adhesive to fill the gap.

　　3 assembly: should be positioned as soon as possible, after positioning can not move the workpiece

　　4 curing: general 1 hours anaerobic adhesive can achieve the use of strength, 24 hours to reach the maximum strength.