Properties: high strength and solvent resistance.

　　Purpose: used in fasteners M6 or smaller

　　Better effect with a certain pattern of lubrication

　　The locking strength can be achieved accurately.

　　Viscosity: 1200/2400

　　Cure time: 20 minutes /10 hours

　　Removing torque: 32N.m

　　Relative density: 1.108

　　instructions:

　　1 surface treatment: derusting, degreasing, cleaning and drying

　　Rust can be mechanical or chemical methods: degreasing, cleaning and using appropriate organic solvent (such as acetone solution

　　For two to three times to soak in.

　　2 apply anaerobic adhesive: apply adequate amount of anaerobic adhesive to fill the gap.

　　3 assembly: should be positioned as soon as possible, after positioning can not move the workpiece

　　4 curing: general 1 hours anaerobic adhesive can achieve the use of strength, 24 hours to reach the maximum strength.