全钢通风柜:

　　1、外壳说明: 外壳采用 1.0mm 优质冷轧钢板在数控加工中心、剪裁、定位打孔、折弯焊接后成型，酸洗磷化处理后喷涂环氧树脂粉末高温烘烤固化。附着力高、表面硬度耐腐蚀性极强，外形美观。

　　2、内壳说明: 采用 5mm 灰色，耐酸碱有机溶剂之实验室专用抗蚀材质。设有可拆卸维修孔，便于维修电路、水路、气路

　　3、日光灯说明:日光灯隐藏于面板上，不与通风柜内气流接触，易更换。采用 30W 日光灯 1支，并设有5mm钢化玻璃。

　　4、把手说明: 不锈钢亚光把手。

　　5、导流板说明: 采5mm 灰色，耐酸碱有机溶剂之实验室专用抗蚀材质。

　　6、电源说明: 采用实验室专用电源插座。

　　7、窗口说明: 铝型材配合塑料型材边框，窗口采用3块 5mm 安全玻璃，可左右移动，并采用无段平衡装置，可上下移动，自由调节 。

　　8、调整脚说明:采用直径φ10mm注塑调整脚，防震、防潮、耐腐蚀，可根据室内地坪适当调整柜体高度，最大调节为0-30mm。

　　9、集气罩说明: 采用 PP 材质

　　10、配电箱说明: 符合 220V 及 380V 供电要求，有漏电及电机保护装置。

　　11、控制开关说明:12V触摸式开关，集中控制整个电路系统

　　12、工艺说明:所有钢板焊接经环氧树脂粉喷图后，目视平整无焊点。所有水、电、气路要求安全、适用，并隐藏式安装。在柜体后背板设维修孔。

　　13、三块导流板使处于不同高度空间的有害气体分别从不同的段区排出。通风柜以操作表面风速0.5m/s的速度将通风柜中的空气排出，确保无任何残留气体存在。通风效率高，排风量为1600m3/h左右，且噪声小。

　　14、下部柜体（一般型底柜），门板:采用 1.0mm 优质冷轧钢板（双层），无焊连接可拆卸带减震垫。在数控加工中心、剪裁、定位打孔、折弯焊接后成型，酸洗磷化处理后喷涂环氧树脂粉末高温烘烤固化

　　All steel ventilation cabinet:

　　1, shell: the shell is made of 1.0mm high quality cold-rolled steel plate molding in CNC machining center, cutting, punching, bending and welding positioning after pickling process after high temperature baking powder spraying curing epoxy resin. The adhesion of high surface hardness, strong corrosion resistance, beautiful appearance.

　　2, the inner shell: adopt 5mm gray, acid resistant laboratory organic solvent resistant material special for. A detachable repair hole, to facilitate the maintenance of circuit, waterway and gas way

　　3, daylight lamp: fluorescent lamp is hidden in the panel, and the ventilation cabinet airflow contact, easy replacement. Using 30W 1 fluorescent lamps, and is equipped with 5mm toughened glass.

　　4, handle: Matt stainless steel handle.

　　5, guide plate Description: Mining 5mm gray, acid resistant organic solvent of the laboratory special corrosion resistant material.

　　6, the power Description: the use of laboratory dedicated power supply socket.

　　7, window: aluminum profile plastic profile frame, with 3 mm safety glass window, can move left and right, and the stepless balance device, can be mobile, free to adjust the.

　　8, the adjustment pin description: with a diameter of 10mm injection adjustment foot, shockproof, moisture-proof, corrosion resistance, according to the indoor floor appropriate adjustments to the cabinet height, maximum regulation 0-30mm.

　　9, gas collection cover Description: the use of PP material

　　10, distribution box description: in line with the 220V and 380V power supply requirements, there is leakage and motor protection device.

　　11, control switch Description: 12V touch switch, centralized control of the entire circuit system

　　12, process description: all steel welded by epoxy resin powder spray, visual flat no solder joints. All water, electricity, gas, road safety requirements apply, and concealed installation. In the back of a maintenance hole.

　　13, three pieces of guide plate the harmful gas in different space height were discharged from different region. Ventilation cabinet to operate the surface wind speed of 0.5m/s will discharge the air in the ventilation cabinet, to ensure that no residual gas. Ventilation efficiency is high, the exhaust volume is about 1600m3/h, and the noise is small.

　　14, the lower part of the cabinet body (general type at the bottom of the tank), door: the 1.0mm high-quality cold-rolled steel plate (double), solderless connections removable belt cushion. Molding in CNC machining center, cutting, punching, bending and welding positioning after pickling process after high temperature baking powder spraying curing epoxy resin