深圳港城艺术雕塑公司为你讲解:很多定制的玻璃钢雕塑都会有拼接，那么如何拼接？一件精美的玻璃钢雕塑作品是如何拼接而成的？

　　Glass and steel sculpture will have many custom stitching, so how to splice? A fine piece of glass and steel sculpture works is how spliced? Jinlan relief design company for you on the grass:

　　玻璃钢雕塑制作过程中，圆雕类雕塑有时会因为操作生产的需要，把模具分成多块来分别制作。制作完成后再将这些不同的部分拼接成整体。

　　In the process of making glass and steel sculpture, sculpture sculpture category sometimes because of the need of production operation, the mold is divided into many blocks were made. After the completion of the production part of the mosaic of different as a whole.

　　在拼接玻璃钢雕塑的时候，越到最后拼接难道越大。到最后会形成了一个封闭的空间，甚至有时根本看不到摸不到接缝。如果在外面用玻璃钢补很容易有开裂情况，我们必须要保证质量。

　　When the mosaic glass and steel sculpture, the final mosaic is greater. The end will form a closed space, and sometimes even simply cannot see the seam. If the repair is easy to crack with glass on the outside, we must ensure the quality.

　　在这种情况下用以下常用的办法能保证质量，防止开裂:

　　To ensure the quality of energy in this case with the following methods, to prevent cracking:

　　先把树脂调稠备用

　　The first resin thicken spare

　　把玻璃纤维布剪成十公分宽20公分长的布条

　　The glass fiber cloth cut into ten cm wide and 20 cm long strips of cloth

　　把调好的树脂，加上药水抹到剪好的布条上面

　　To transfer a good resin, and to cut the cloth to wipe the potion above

　　把带有树脂的布条贴到郑州玻璃钢雕塑的内表面。注意要把布条的二分之一贴到玻璃钢雕塑的内表面，是贴成一个弧形，而不是把整个布条都贴上去。余下的要超过玻璃钢雕塑的边界2公分左右，这样整个贴一圈，把另外一边也要贴上。

　　The inner surface with resin cloth affixed to the glass and steel sculpture of Zhengzhou. Pay attention to the 1/2 cloth affixed to the inner surface of glass and steel sculpture, is put into an arc, rather than the whole cloth are attached. The rest is more than glass and steel sculpture borders 2 centimeters, so that the whole mount in a circle, the other side will stick.

　　等待固化后在布条上面抹上调好的树脂，然后两块玻璃钢雕塑对接到一块，用力按一下，等到完全固化即可脱模。

　　Wait for after curing resin in the cloth wipe up above, and two pieces of glass and steel sculpture of receiving a press force, until fully cured, can release.