德国凯森KAYSEN《进口气动隔膜泵（进口不锈钢气动隔膜泵）》由中国上海营派阀门有限公司总代理
德国KAYSEN凯森进口气动隔膜泵概述
气动隔膜泵是目前国内最新颖的一种泵类。对于各种腐蚀性液体，带颗粒的液体，高粘度、易挥发、易燃、剧毒的液体，均能予以抽光吸尽。
气动隔膜泵采用压缩空气为动力源，对于各种腐蚀性液体，带颗粒的液体，高粘度、易挥发、易燃、剧毒的液体，均能予以抽光吸尽。
泵体采用四种材质，铝合金、铸铁、工程塑料、不锈钢。根据不同液体介质分别采用丁晴橡胶、氯丁橡胶、氟橡胶、聚四氟乙烯。以满足不同用户的需要。
主要特点:Made in Germany
气动隔膜泵不需灌引水，吸程高达7m，扬程达50m，产品扬程可以达到70米左右，出口压力≥7kgf/cm2; 流动宽敞，通过性能好，允许通过最大颗粒直径达10mm。抽送泥浆、杂质时，对泵磨损甚微; 扬程、流量可通过气阀开度实现无级调节（气压调节在1-7kgf/cm2之间）; 该气动隔膜泵无旋转部件，没有轴封，隔膜将抽送的介质与泵的运动部件、工作介质完全隔开，所输送的介质不会向外泄漏。所以抽送有毒、易发挥或腐蚀性介质时，不会造成环境污染和危害人身安全; 不必用电，在易燃、易爆场所使用安全可靠; 可以浸没在介质中工作;
使用方便、工作可靠、开停只需简单地打开和关闭气体阀门，即使由于意外情况而长时间无介质运行或突然停机，气动不锈钢隔膜泵也不会因此而损坏，不旦超负荷，泵会自动地停机，具有自我保护性能，当负荷恢复正常后，又有自动启动运行; 结构简单、易损件少，该气动不锈钢隔膜泵结构简单，安装、维修方便，泵输送的介质不会接触到配气阀，联杆等运动部件，不象其他类型的泵因转子、活塞、齿轮、叶片等部件的磨损而使性能逐步下降; 可输送较粘的液体（粘度在1万厘泊以下）; 本泵无须用油润滑，即使空转，对气动不锈钢隔膜泵也无任何影响
主要优点:Made in Germany
。使用方便、工作可靠、开停只需简单地打开和关闭气体阀门，即使由于意外情况而长时间无介质运行或突然停机泵也不会因此而损坏，一旦超负荷，泵会自动地停机，具有自我保护性能，当负荷恢复正常后，又能自动启动运行
。结构简单、易损件少，该泵结构简单，安装、维修方便，泵输送的介质不会接触到配气阀，联杆等运动部件，不像其他类型的泵因转子、活塞、齿轮、叶片等部件的磨损而使性能逐步下降
。可输送较粘的液体(粘度在1万厘泊以下）
。不需灌引水，吸程高达5米，扬程达70米，出口压力≧7bar
。流动宽敞，通过性能好，允许通过最大颗粒直径达10毫米。抽送泥浆、杂质时，对泵磨损甚微
。本泵无须用油润滑，即使空转，对泵也无任何影响
。不必用电，在易燃、易爆场所使用安全可靠
。可以浸没在介质中工作
。扬程、流量可通过气阀开度实现无级调节(气压调节在1-7bar之间)
。该泵无旋转部件，没有轴封，隔膜等抽送的介质与泵的运动部件、工件介质完全隔开，所输送的介质不会向外泄漏。所以抽送有毒、易挥发或腐蚀性介质时，不会造成环境污染和危害人身安全
主要应用:Made in Germany
。油井钻好后，用气动隔膜泵吸沉积物及灌浆。
。吸各种乳剂和填料。
。吸各种污水。
。各种强酸、强碱、强腐蚀液体。
。吸各种高温液体最高可耐150度。
。可以吸花生酱、泡菜、土豆泥、小红肠、果酱苹果浆、巧克力等。
。矿井、坑道、隧道、选矿、矿渣中的积水。泵吸水泥灌浆及灰浆。
。不锈钢隔膜泵泵吸各种橡胶浆。
。不锈钢气动隔膜泵可以吸各种磨料、腐蚀剂、石油及泥浆、清洗油垢及一般容器。
。可以吸各种剧毒、易燃、易挥发液体。
。不锈钢气动隔膜泵可以用于吸油漆、树胶、颜料。
。不锈钢气动隔膜泵作为各种固液体分离设备的前级送压装置。
。气动隔膜泵可以用于为油轮，驳船清仓吸取仓内污水。
。吸啤酒花及发酵粉稀浆、糖浆、糖密。
。粘合剂和胶水、全部种类可用泵吸取。
。各种瓦、瓷、砖器及陶器釉浆。
Germany KAYSEN imported pneumatic diaphragm pump overview
Pneumatic diaphragm pump is currently the most innovative kind of pump. For a variety of corrosive liquids, with the particles of liquid, high viscosity, volatile, flammable, highly toxic liquid, can be exhausted exhaustion.
Pneumatic diaphragm pump using compressed air as the power source, for a variety of corrosive liquids, with particles of liquid, high viscosity, volatile, flammable, highly toxic liquid, can be exhausted.
The pump body uses four kinds of material, aluminum alloy, cast iron, engineering plastic, stainless steel. According to different liquid media were used Dingqing rubber, chloroprene rubber, fluorine rubber, PTFE. To meet the needs of different users.
main feature:Made in Germany
Pneumatic diaphragm pump without irrigation water, suction up to 7m, lift up to 50m, the product head can reach 70 meters, the outlet pressure ≥ 7kgf / cm2; mobile spacious, through the performance is good, allowing the maximum particle diameter of 10mm. Pumping the mud, impurities, the pump wear is very small; head, the flow through the valve opening to achieve stepless adjustment (air pressure adjustment between 1-7kgf / cm2); the pneumatic diaphragm pump without rotating parts, The diaphragm will be pumping the media and the pump moving parts, the working medium completely separated, the transmission of the media will not leak out. So the pumping of toxic, easy to play or corrosive media, will not cause environmental pollution and harm to personal safety; no electricity, in flammable, explosive places safe and reliable; can be submerged in the media work;
Easy to use, reliable, open only need to simply open and close the gas valve, even if the accident due to a long time without media operation or sudden shutdown, pneumatic stainless steel diaphragm pump will not be damaged, no overload, Automatic suspension, with self-protection performance, when the load back to normal, there are automatic start running; simple structure, less wearing parts, the pneumatic stainless steel diaphragm pump is simple, easy installation, easy maintenance, pump delivery media will not come into contact with Such as rotor, piston, gear, blade and other components of the wear and tear caused by the gradual decline in performance; can transport more viscous liquid (viscosity in less than 10,000 centipoise); The pump does not need oil lubrication, even if the idle, the pneumatic stainless steel diaphragm pump without any impact
Key Benefits:Made in Germany
。 easy to use, reliable, open only need to simply open and close the gas valve, even if the accident due to a long time without media operation or sudden shutdown pump will not be damaged, once overload, the pump will automatically shut down, With self-protection performance, when the load back to normal, but also automatically start running
。 Simple structure, less wearing parts, the pump structure is simple, easy installation, easy maintenance, pump delivery media will not come into contact with the valve, connecting rod and other moving parts, unlike other types of pumps due to the rotor, piston, Leaves and other components of the wear and tear of the performance gradually decreased
。 can be transported more viscous liquid (viscosity in less than 10,000 centipoise)
。No irrigation water, suction up to 5 meters, up to 70 meters, the export pressure ≧ 7bar
。 Flow is spacious, through the performance is good, allowing the maximum particle diameter up to 10 mm. Pumping mud, impurities, the pump wear little
。 The pump does not need oil lubrication, even if the idle, the pump has no effect
。 do not have electricity, in flammable, explosive use of safe and reliable place
。 can be immersed in the medium to work
。 head, the flow through the valve opening to achieve stepless adjustment (air pressure adjustment between 1-7bar)
。The pump has no rotating parts, no shaft seal, diaphragm and other pumping media and pump moving parts, the workpiece medium completely separated, the transmission of the media will not leak out. So that the extraction of toxic, volatile or corrosive media, will not cause environmental pollution and harm to personal safety
main application:Made in Germany
After the oil well is drilled, the sediment and the grouting are pumped with a pneumatic diaphragm.
。 Take a variety of emulsions and fillers.
。 Take a variety of sewage.
。 all kinds of strong acid, alkali, strong corrosive liquid.
。 suction a variety of high temperature liquid up to 150 degrees.
。 can be peanut butter, pickles, mashed potatoes, small red sausage, jam apple pulp, chocolate and so on.
。 mine, tunnel, tunnel, mineral processing, slag in the water. Pumping cement grouting and mortar.
。 stainless steel diaphragm pump pumping a variety of rubber pulp.
。 stainless steel pneumatic diaphragm pump can absorb a variety of abrasives, corrosion agents, oil and mud, cleaning grease and general containers.
。 can absorb a variety of highly toxic, flammable, volatile liquid.
。 stainless steel pneumatic diaphragm pump can be used to absorb paint, gum, paint.
。 stainless steel pneumatic diaphragm pump as a variety of solid liquid separation equipment, the former pressure device.
。 Pneumatic diaphragm pump can be used for tankers, barge clearance to absorb the sewage inside the warehouse.
。 suction hops and baking powder slurry, syrup, sugar secret.
。 Adhesive and glue, all types can be pumped.
。all kinds of tile, porcelain, brick and pottery glaze pulp.
欢迎来到Kaysen凯森泵。
品质，创新，实力，可靠性。
是凯森的基本特征。
我们认为，作为一个家庭是正确的方式来处理我们的全球业务。
当有人选择Kaysen是因为信任和可靠性。
我们每天在我们的gemba kaizen工作，以达到极端的定制水平和客户满意度。
我们致力于技术开发，走在前列，适用各项规定。
我们在移动时研究水流动路线和鸟类飞行，以了解自然如何教导我们节约能源。
我们在德国的工厂生产，库存和快速交货都是Kaysen凯森泵标准，使我们与其他泵制造商不同。
随着产品创新的广泛选择，Kaysen凯森泵承诺，使其渠道合作伙伴更具竞争力和更成功。
Kysen凯森泵专业的技术为工业泵制造商感到自豪。
Welcome to Kaysen Pump.
Quality, innovation, strength, reliability.
Is the basic characteristics of Kaysen