德国凯森KAYSEN《进口电动隔膜泵（进口不锈钢电动隔膜泵）》由中国上海营派阀门有限公司总代理
德国KAYSEN凯森进口电动隔膜泵概述
德国凯森进口电动隔膜泵采用摆线针轮减速机传动，通过曲轴滑块机构带动双隔膜作往复运动，使工作腔容积发生交替变化从而达到将液体不断地吸入和排出，近年来，由于在隔膜材质上取得了突破性的进展，隔膜泵广泛应用于石化、陶瓷、冶金等行业。隔膜泵特点是不需灌引水，自吸能力强，噪音小。直接将被输送介质和传动机械件分开，所以介质绝对不会向外泄漏。且泵本身无轴液封，使用寿命大大延长。应用领域:喷漆、陶瓷业中隔膜泵已占有绝对的主导地位；环保、废水处理、建筑、排污、精细化工中正在扩大它的市场份额，并具有其他泵不可替代的地位。
主要优点:Made in Germany
。不需灌引水，自吸能力达7米以上。
。通过性能好，直径在10毫米以下的颗粒、泥浆等均可以毫不费力地通过。
。由于隔膜将被输送介质和传动机械件分开，所以介质绝对不会向外泄漏。且泵本身无轴封，使用寿命大大延长。根据不同介质，隔膜分为氯丁橡胶、氟橡胶、丁晴橡胶等，完全可以满足不同用户的要求。
。体积小重量轻:由于采用了行星摆线传动结构，故使泵型获得小尺寸如与同类型泵来比较，其体积重量均下降一半左右。
。泵体介质流经部份，可根据用户要求，分为铸铁、不锈钢、衬胶、电机分为普通式、防爆式、变频式、电磁调速式，该泵正应用在下列场合。
主要应用:Made in Germany
。各种特殊介质的吸送
。各种剧毒、易燃、易挥发液体
。泵吸油漆、树胶、颜料粘合剂
。泵吸泡菜、果酱、土豆泥、巧克力等
。各种橡胶浆乳胶、有机溶剂、填料。
。各种瓷器釉浆、水泥灌浆、灰浆、泥浆
。可输送较高温度的介质150℃
。作为各种压滤机前级送压装置
。用泵为油轮驳船清仓吸取仓内污水及剩油
。 热水回收及循环
。啤酒花及发酵粉稀浆、糖浆、糖蜜。
。油罐车、油库、油品装卸
。各种强酸、强碱、强腐蚀液体
。泵吸矿井、坑道、隧道、下水道中污水、沉淀物
主要特点:Made in Germany
最大流量:12.8-480L/min
最大扬程:40-70m
出口压力:0.4-0.7MPa
口径:10-125mm
转速:1450r/min
电机功率:0.55-5.5kw
Germany KAYSEN imported electric diaphragm pump Overview:
Germany Kaysen imported electric diaphragm pump with cycloid reducer transmission, through the crankshaft slider mechanism to drive double diaphragm for reciprocating motion, so that the working chamber volume alternately changes in order to achieve the liquid inhalation and discharge, in recent years, due to Diaphragm material has made a breakthrough in the development of diaphragm pumps are widely used in petrochemical, ceramics, metallurgical and other industries. Diaphragm pump is characterized by no irrigation water, self-priming ability, low noise. Will be directly transported by the transmission and mechanical parts separately, so the media will not leak out. And the pump itself without shaft seal, greatly extend the service life. Applications: Painting, ceramic industry in the diaphragm has occupied an absolute dominant position; environmental protection, wastewater treatment, construction, sewage, fine chemical industry is expanding its market share, and has other pump irreplaceable position.
Key Benefits:
。 no water, self-priming capacity of more than 7 meters.
。 through the performance is good, the diameter of 10 mm below the particles, mud, etc. can be effortlessly through.
。 Since the diaphragm will be separated from the conveying medium and the transmission part, the medium will never leak outwards. And the pump itself without shaft seal, greatly extend the service life. According to different media, the diaphragm is divided into chloroprene rubber, fluorine rubber, Dingqing rubber, etc., can meet the requirements of different users.
。 small size and light weight: As a result of the planetary cycloidal transmission structure, so the pump type to obtain small size as compared with the same type of pump, the volume and weight are reduced by about half.
。 Pump body flow through the part, according to user requirements, divided into cast iron, stainless steel, rubber, motor is divided into ordinary type, explosion-proof, frequency, electromagnetic speed, the pump is used in the following occasions.
main application:
。 the absorption of various special media
。A variety of highly toxic, flammable, volatile liquid
。Pump suction paint, gum, pigment binder
。pump pickles, jam, mashed potatoes, chocolate and so on
。all kinds of rubber latex, organic solvents, fillers.
。all kinds of porcelain glaze pulp, cement grouting, mortar, mud
。can transport higher temperature media 150 ℃
。as a variety of pressure filter before the pressure device
。With the pump for the tanker barge clearance to absorb the sewage inside the warehouse and the remaining oil
Hot water recovery and circulation
。 hops and baking powder slurry, syrup, molasses.
。tankers, oil depots, oil handling
。 all kinds of strong acid, alkali, strong corrosive liquid
。Pumping wells, tunnels, tunnels, sewers, sewage, sediment
main feature:
Maximum flow: 12.8-480L / min
Maximum head: 40-70m
Outlet pressure: 0.4-0.7MPa
Caliber: 10-125mm
Speed: 1450r / min
Motor power: 0.55-5.5kw
欢迎来到Kaysen凯森泵。
品质，创新，实力，可靠性。
是凯森的基本特征。
我们认为，作为一个家庭是正确的方式来处理我们的全球业务。
当有人选择Kaysen是因为信任和可靠性。
我们每天在我们的gemba kaizen工作，以达到极端的定制水平和客户满意度。
我们致力于技术开发，走在前列，适用各项规定。
我们在移动时研究水流动路线和鸟类飞行，以了解自然如何教导我们节约能源。
我们在德国的工厂生产，库存和快速交货都是Kaysen凯森泵标准，使我们与其他泵制造商不同。
随着产品创新的广泛选择，Kaysen凯森泵承诺，使其渠道合作伙伴更具竞争力和更成功。
Kaysen 凯森泵专业的技术为工业泵制造商感到自豪。
Welcome to Kaysen Pump.
Quality, innovation, strength, reliability.
Is the basic characteristics of Kaysen
We believe that as a family is the right way to deal with our global business.
When someone chooses Kaysen because of trust and reliability.
We work every day at our gemba kaizen to achieve extreme customization and customer satisfaction.
We are committed to technology development, walk in the forefront, apply the provisions.
We study water flow routes and birds when moving to learn how nature teaches us to conserve energy.
Our factory production, inventory and quick delivery in our German are Kaysen Pumps standard, making us different from other pump manufacturers.
With the wide selection of product innovation, Kaysen Pumps promises to make its channel partners more competitive and more successful.
Kaysen Pumps Professional Technology is proud of industrial pump manufacturers.
质保期:壹年
产品产地:德国
产品品牌:德国凯森《KAYSEN》
Warranty period: one year
Product Origin: Germany
Product brand: Germany kaysen "KAYSEN"