温变粉Temperature powder
变色原理metachromatic principle
感温变色是一种随温度上升、下降而反复改变颜色的微胶囊颜料。变色形式:低温有色，高温无色。可以反复变换颜色。
Thermal discoloration is a kind of color change with temperature rising, falling and repeated the microcapsule of pigment. Color change form: low temperature, high temperature colorless. Can change color again and again.
色系、温度以及变色形式Color, temperature and discoloration
感温变色基本颜色:大红、朱红、玫红、桃红、橙红、金黄、紫罗兰、深蓝、蓝色、绿色、黑色、土耳其蓝
Thermal discoloration basic colors: bright red, scarlet, mei red, pink, orange, yellow, violet, dark blue, blue, green, blue, black, Turkey
温度有:5℃，8℃，10℃，12℃，15℃，18℃，22℃，28℃，31℃，33℃，35℃，38℃，40℃，43℃，45℃，50℃，55℃，60℃，62℃，65℃，70℃等。以上温度为可逆温度，例如31度红色温度高于31变无色温度低于31变红色。
Temperature: 5 ℃ 8 ℃, 10 ℃, 12 ℃, 15 ℃, 18 ℃, 22 ℃, 28 ℃, 31 ℃ and 33 ℃, 35 ℃, 38 ℃, 40 ℃ and 43 ℃, 45 ℃, 50 ℃ and 55 ℃, 60 ℃, 62 ℃, 65 ℃, 70 ℃, etc. 31 degrees above the temperature of the reversible temperature, such as red temperature higher than 31 colorless temperature below 31 red.
有色变有色:紫变红蓝变红绿变蓝紫变蓝橙变黄蓝变黄红变黄黑变紫黑变红黑变蓝黑变绿黑变橙大红变粉红深蓝变浅蓝深绿变浅绿深黄变浅黄
Color change color: purple red blue red green blue purple blue red, yellow orange yellow, blue, yellow black change purple black red and black blue dark green is dark orange red change pink blue pale blue green deep yellow light green yellow
感温变色材料的应用与用途
The application and use of thermal color materials
*涂料:适合各类塑胶制品的表面涂覆。含ABS、PE、PP、PS、PVC、EVA及其它塑胶材料等
Coating: suitable for all kinds of plastic products surface coating. Including ABS, PE, PP, PS, PVC, EVA and other plastic materials
*油墨:适合于各类印刷，包适网版、凹版和凸版印刷，可印刷于各式材料，包括纺织、纸张、合成膜、玻璃、陶瓷和木材等。
Ink: suitable for all kinds of printing, BaoShi network edition, intaglio and letterpress printing, can be printed in a variety of materials, including textile, paper, synthetic membrane, glass, ceramic and wood, etc.
*塑胶:高色浓度的共用级塑胶色母粒可以混入PE、PP、PS、PVC、EVA、PET、及Nylon中一起射出、押出产品。
Plastic: high concentration of color grade common plastic masterbatch can be mixed with PE, PP, PS, PVC, EVA, PET, and Nylon injection, and the product together.
操作注意事项Operating considerations
温变粉注塑适用的材料为:PP/PVC/ABS/PU/EVA/硅胶
Temperature powder for injection applicable materials: PP/ABS/PVC/PU/EVA/silica gel
温变粉的注塑比例为0.5%-0.8%，通常为0.5%，普通颜料遇变色颜料拼色，则普通颜料（或染料）的用量大约为变色颜料的0.5%-2.5%
Temperature powder injection rate is 0.5% - 0.8%, 0.5%, usually in ordinary paint color pigment color matching, the ordinary pigment or dye dosage of approximately 0.5% - 0.5% of color pigments
注塑分散不开可加分散剂（白蜡油、分散油）、扩散粉、白油。白蜡油加入有种湿湿的使混合更均匀，加多会起泡，加1%左右，也可不加。
Injection scattered don't open the disperser (white wax oil, dispersed oil), diffusion, white powder. White wax oil mixed with a wet make more evenly, add up bubbles, add 1%, also don't add.
可调色:除金银白外都可以调色。有色变有色只能两个接近撞色才能调。
Color: can be color except gold and silver white. Color change of color only two close to bump color tone.
用料:透明料效果佳。
Ingredient: transparent material effectively.
注塑成品一般使用寿命是4000-8000次变色次数（正确存储和使用的情况下）
The service life of the injection molding product general change color number is 4000-8000 times (correct storage and use cases)
保存条件:不耐候，低温避光，干燥全避光条件保存。
Storage condition: no weather resistance, low temperature away from light, dry dark conditions
感温变色产品之设计以高温环境时与低温环境时有颜色变化为诉求，并大多应用于人体感温的系列产品，也可做防伪设计使用。
Thermal discoloration of product design in high temperature environment with low temperature environment change color to appeal, and mostly used in the human body thermal series products, also can be used to do security design.